POLO 6R. 6R0 953 521B Stalks with CCS buttons. Brand new (unused). Genuine. SOLD

[ciclo]

6R0 953 521B

OEM, brand new.

With CCS Buttons, without trip computer buttons. So, perfect for MFSW.

Total = 70 € (euros)

Inc paypal fees, and shipping costs (Shipping to Europe, not for other countries).

Payment by paypal.

[ciclo]

If you buy these stalks and you want the CCS wiring, here you have the perfect wiring.











+10 € (euros)... original fuse included (Littelfuse)

[ciclo]

It seems they are already sold.
You can use this same sales topic if you need my technical support for the installation of these stalks.

[ag69]

Sure ciclo.
Thanks for selling this part (to me).

[ag69]

If you buy these stalks and you want the CCS wiring, here you have the perfect wiring.
+10 € (euros)... original fuse included (Littelfuse)

sir,
SOS,
since both wire 26 and 29 are black on white --
does wire 29 from stalk go to BCM?
or
does wire 26 from stalk go to BCM?

we could pinpoint a wire with multimeter.

[ciclo]

Hi ag69





As you can see in the image both wires must be inserted into the T41 connector in slots 26 and 29.

Choose the one you prefer to insert in the slot you prefer, both wires are the same signal, identical. It is the same wire with two endings. Simple, easy. That is why it is the same white/black color for both wires.

[ag69]

thanks for quick reply
sorry but did not get it

the longer wire ie one which is going to ECU, the other end of that -- where should I insert? 26 or 29 ?

[ag69]

again--
26 and 29 have same signal stalks,
one goes to ecu and other to BCM?
so it doesnot matter which white and black goes in 26 or 29 ?

[ciclo]

Please post a picture so that I know exactly what you mean.

[ciclo]

again--
26 and 29 have same signal stalks,
one goes to ecu and other to BCM?

It is not exactly that way.

T41/26, T41/29. T73b/45, and Ecu wire is the same wire.

so it doesnot matter which white and black goes in 26 or 29 ?

Exactly.

[ag69]

[/quote]
Exactly.
[/quote]

Thank you.
Inserted two wires in 26 and 29.
Somehow my English is not as good to write question. But glad your patience it is fixed now.

[ciclo]

Somehow my English is not as good to write question.

No worries, I think it's the other way around, I'm the one to blame.

[ag69]

After many years I have finally put BCM wires and ECU wire.
Now SB 11 has 10A
So should we tap it with 5A?

[ciclo]

Hi Amit.
NO, there are better solutions.
Please check your email address inbox. I just sent you an email.

[ag69]

Thanks ciclo

We put it in slot 10 with 5A
Enabled two-bit values under 09 and 01 and both got accepted.

After 30kmph --making cruise top toggle on and pressing set we get green illumination on your instrument cluster
But on lifting foot of accelerator speed does not remain constant ie it slows down