Page 1 of 1
Error code
Posted: Sun Feb 04, 2018 3:05 pm
by DKPOLOGT
Can anyone help with translation of the following code.
Component : bcm pq26 hi4r
Code : 227080
I cant seem to google the code.
Cheers
Sent from my iPhone using Tapatalk
Re: Error code
Posted: Sun Feb 04, 2018 3:13 pm
by iichel
what device did you use? vcds?
if so, maybe a full autoscan would be more useful
Re: Error code
Posted: Sun Feb 04, 2018 3:22 pm
by DKPOLOGT
iichel wrote:what device did you use? vcds?
if so, maybe a full autoscan would be more useful
Hello
I used carista.
This is the print.
Sent from my iPhone using Tapatalk
Re: Error code
Posted: Sun Feb 04, 2018 3:25 pm
by iichel
227080 - Turn Signal Switch
Further explanation not possible... could be Signal implausible, electrical malfunction, short to GND, short to plus... needs better tool...
Re: Error code
Posted: Sun Feb 04, 2018 3:39 pm
by DKPOLOGT
iichel wrote:227080 - Turn Signal Switch
Further explanation not possible... could be Signal implausible, electrical malfunction, short to GND, short to plus... needs better tool...
Thanks man.
Turn signal functions 100%.
I have deleted the code. Ill have a check back in a few days for a new scan.
Btw. Where do you look up the code ?
Sent from my iPhone using Tapatalk
Re: Error code
Posted: Sun Feb 04, 2018 3:41 pm
by iichel
Re: Error code
Posted: Sun Feb 04, 2018 8:43 pm
by RUM4MO
DKPOLOGT, I think that you will find that Carista is a bit slow to catch up with some of the newer cars newer fault codes, but they will get there with some more time. I've found that on a couple of occasions, but I had VCDS to tell me watch the correct code was.
One thing though, as far as I've found, Carista will faithfully report all faults, it is just that it can not give any or correct descriptions to some of these newer codes, older codes, ie codes numbers that VW Group has assigned to cars in the past 10 years will always get correct descriptions given to them by Carista.