I have been looking at some aftermarket parts for my 67 plate R-line polo and they mostly come up with GTI parts.
I have been wondering if I could buy these parts and straight fit them onto my R-line Polo
Fitting parts from a polo gti to a polo R-line
- iichel
- Bling Bling Diamond Member
- Posts: 6686
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Fitting parts from a polo gti to a polo R-line
Mostly yes but you need to be more specific about what parts you want to swap over
Re: Fitting parts from a polo gti to a polo R-line
Hi, I’ve been looking at a miltek exhaust which fits onto a 1.8 GTI and I’m not sure if all the fittings would be the same along with a down pipe.
- iichel
- Bling Bling Diamond Member
- Posts: 6686
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Fitting parts from a polo gti to a polo R-line
That's not going to fit, the 1.8 TSI will use a different exhaust than whatever your car has.
Re: Fitting parts from a polo gti to a polo R-line
Thank you very much for the help
