Do you have to drill a hole from the engine bay?
Posted: Wed Nov 03, 2004 11:52 am
to get wires through? or is there a hole?
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://www.uk-polos.net/
Do you have to drill a hole from the engine bay?
Page 1 of 1
Posted: Wed Nov 03, 2004 2:44 pm
I fed my power cable through the hole in the bulkhead that's got all the regular wiring-loom-wires going through it, there's just enough room to squeeze one extra in there. Saves drilling!
Posted: Wed Nov 03, 2004 7:34 pm
no don't do any drilling! there should be a few places - I did a bit in the DIY section on how to wire it up....
Posted: Wed Nov 03, 2004 8:18 pm
i ended up drilling a hole on the passenger side and driver side, but the driver side is easier if you are as the pollen filter and you need to remove a good bit of the dash are on the passenger side 
Posted: Wed Nov 03, 2004 8:40 pm