UK-POLOS.NET - THE VW Polo Forum

I've had this same issue except it seems to be more random as opposed to when I drive / reverse they change, I believe its the stalks as well

It also seems to stop and work fine for a period and then after it's been raining / wet I tend to get the issue (I don't know if this is just because I've ...

I managed to find a salvage photo online which shows the colour of the original plug wires, it looks like the wiring on my new plug is correct

I googled 6C0 920 930 from my VCDS scan and it looks like that PN is for the ODO/gauge cluster I wonder if that's where the fault lies

If anyone has ...

Hey UKPolos, Found some mice that have kindly been living above my fuel pump which is why my gauge would sometimes intermittently stop and start (usually for a minute or so)

Someone that works for my Dad's garage put a new fuel plug on for me but I'm still getting a fuel pump gauge error (the ...

So I finally had some time today to try and install the remote onto the central locking system in my basic model 2014 6C and after I wrestled with the boot release lid mechanism and driver's side footwell panels I managed to locate what I thought were the correct locking wires going by the ...

Does anyone know if it is possible to reverse the functionality of the button?

I don't want to disable the function completely but would like it to be turned off by default when I start the car and come on when I press the button

https://www.youtube.com/watch?v=QNvRfyZJq90

This guy has done what ...

My dealer retrofitted cruise on my 6C. I have the same stalks as you. It’s done by adding additional buttons to the steering wheel. The wires are not in place to do it by stalks.
The dealer has to get a license key to enable the option. It was not expensive so just let them do it..



Can you ...

Lktuning wrote: Wed May 08, 2019 5:19 am This part number:

6C0953513B with out trip computer

Or

6C0953513C With trip computer

Thanks i'm gonna order 6C0953513C With trip computer

Does it need additional wiring loom or can I just plug it into the existing stalk sockets and enable it with vagcom?

Dink wrote: Mon May 06, 2019 11:20 am the only retrofit way is to use the stalks on a 6c.

Thanks for the info

Any idea on what part numbers I should order / how to find the part numbers i need?
I asked the seller and he said this would be compatible with my 6C but I am a little sceptical.

Hi

Does anyone know if it is possible to retrofit cruise control to a Polo 6C Bluemotion 2014, either through a new stalk or mfsw?

I would prefer to fit a mfsw but looking online there seems to be very little info on doing so and I assume it is harder than retrofitting stalks.

Would I need to get ...

Hey do you know if the wiring is the same and if these kits would work on the 6C?