Seat cupra pd160 intake for 9N

DAZZA_TDI · Post by **DAZZA_TDI** » Sun Jul 24, 2005 6:00 pm

Lol andrew ya numpty

bet you felt like a right div, well worth getting tho m8 and cannae argue with 25 quid imo "AT SEAT"
Dazza

jtstatic · Post by **jtstatic** » Fri Jul 29, 2005 7:08 pm

The maximum power output did not change on mine (at least noticably) but the car pulls better (smoother) from lower revs, the engine note is also a bit sportier, or maybe I just like to think so..

Consumption is pretty much the same, driving style makes more difference IMO..

mikehowett · Post by **mikehowett** » Sat Aug 26, 2006 5:23 pm

Can someone give me a link to the green cotton filter that fits in the 9n 1.4TDi please, I think i've ordered the wrong one

EDIT: Nevermind, i had got the right one after all

Ray_chan · Post by **Ray_chan** » Thu Jan 18, 2007 9:51 pm

would it be better to get and BMC CDA induction kit than a PD160 intake??

Ray

jmv · Post by **jmv** » Fri Jan 19, 2007 5:49 pm

i would have thought so, but i dont know for definate.

i have a neuspeed filter on mine with a heat shield, i think there is just a noise difference!!

Ray_chan · Post by **Ray_chan** » Tue Jan 23, 2007 12:28 pm

yeah opened air induction tends to make more noise, but for seal induction tends to be more quiter and more hp gain.Im gonna get an BMC induction kit for mine and see how it goes

Ray

jmv · Post by **jmv** » Tue Jan 23, 2007 5:24 pm

Ray_chan wrote:yeah opened air induction tends to make more noise, but for seal induction tends to be more quiter and more hp gain.Im gonna get an BMC induction kit for mine and see how it goes

Ray

i dont know about quieter, the piper-x viper is really loud!!

the sound will also resonate in the enclosure.

Ray_chan · Post by **Ray_chan** » Tue Jan 23, 2007 5:46 pm

jmv wrote:
Ray_chan wrote:yeah opened air induction tends to make more noise, but for seal induction tends to be more quiter and more hp gain.Im gonna get an BMC induction kit for mine and see how it goes

Ray
i dont know about quieter, the piper-x viper is really loud!!

the sound will also resonate in the enclosure.

i think it will be quiter with the cold air feed installed.

jmv · Post by **jmv** » Wed Jan 24, 2007 5:39 pm

Ray_chan wrote:
jmv wrote:
Ray_chan wrote:yeah opened air induction tends to make more noise, but for seal induction tends to be more quiter and more hp gain.Im gonna get an BMC induction kit for mine and see how it goes

Ray
i dont know about quieter, the piper-x viper is really loud!!

the sound will also resonate in the enclosure.
i think it will be quiter with the cold air feed installed.

how will a cold air feed make it quieter??!?!?

FaMeL · Post by **FaMeL** » Sun Feb 18, 2007 8:04 am

Can i install the cupra air intake in a petrol 9n?

sorry for the lame question...

RichardBW · Post by **RichardBW** » Thu Feb 22, 2007 9:04 pm

FaMeL wrote:Can i install the cupra air intake in a petrol 9n?

sorry for the lame question...

Probably. Post a picture of your engine bay.
It may not be worth it though as the 1.2/1.4 already get as much air as it needs so extra flow in to the air box may be no benefit at all. May sound better though?

RichieLee · Post by **RichieLee** » Wed Aug 15, 2007 11:29 pm

If I get one of these intakes do i have to get air filters that are cupra fitment then? I'm not sure what this part is can someone post a picture? I'd like to put one in before I get my 1.4TDi remapped

DanDiesel · Post by **DanDiesel** » Thu Aug 16, 2007 6:57 pm

nope u'd need to get the correct filter to fit your engine, the bit that everyone is talking about is just an intake into the airbox.
here is a picture of my old intake:

(the intake is between the battery and the engine cover)
the intake i have now is the pd160 and is wider to allow more air to pass through it!