Throttle Body
Throttle Body
ok so my 1.4 se 8v has been over fueling abit n the fuel consumption has gone down abit 2 so took it to get it serviced in find the fault
£150 l8r full service done and problem found i need a new THROTTLE BODY, any one else come across this fault ?
PLEASE HELP
£150 l8r full service done and problem found i need a new THROTTLE BODY, any one else come across this fault ?
PLEASE HELP
- bstardchild
- Moderator
- Posts: 3057
- Joined: Sun Mar 28, 2004 9:53 pm
- Location: Norfolk - "Its just Black & Dirty"
If you do buy a new one (or even get a half decent second hand one) can I have your old one - please don't throw it away......
Just in case you are wondering it's a favorite trick of mine is to get them bored out to a bigger diameter and fit a new butterfly (larger) but I need one to inspect and see how much I can improve it by......
I don't think it gives much more bhp but it normally improves the torque and drivability
Just in case you are wondering it's a favorite trick of mine is to get them bored out to a bigger diameter and fit a new butterfly (larger) but I need one to inspect and see how much I can improve it by......
I don't think it gives much more bhp but it normally improves the torque and drivability
- bstardchild
- Moderator
- Posts: 3057
- Joined: Sun Mar 28, 2004 9:53 pm
- Location: Norfolk - "Its just Black & Dirty"
- bstardchild
- Moderator
- Posts: 3057
- Joined: Sun Mar 28, 2004 9:53 pm
- Location: Norfolk - "Its just Black & Dirty"
So do you want to sell the old one to me then?MintySE wrote:Did you get another one in the end? second hand or new?
Yea got a nice new one at a very reasonable price from euro car parts
also got my old one back when i picked up the car
As I said in a previous post I want to see if
- It can be swaped with one on a 1.6L 8V (so a loose TB would be handy to take to the scrappies to compare)
or
- It can be overbored and fitted with a new butterfly sized to suit
As a result I don't want to spend a lot of cash on something that may well not be possible
- bstardchild
- Moderator
- Posts: 3057
- Joined: Sun Mar 28, 2004 9:53 pm
- Location: Norfolk - "Its just Black & Dirty"
Depends - this is just a look see to see if I can help everyone get a bit more poke out of the 1.4 8V engines - I'm hoping you have a 1.4 AEX engine for starters as that means I can at least try it out on mineMintySE wrote:how much are you offering me for it m8 ?
if you don't have a 1.4 AEX engine I'll need to see if they are the same TB's on different engines but VAGparts should help there with a check on the part numbers across all the engine codes..
how does a Fiver plus postage sound? - thats about all I want to spend on a scrap one and I hope you understand why now
- it's gonna take 10 mins to work out if it can be bored out by any beneficial amount and £40 to get it bored if it is worth it and all that depends on if its from an AEX engine and if it isn't if it will fit at all
I need to understand why yours is fubar too cos no point boring out a duff one is there?
My suspiscions are excess play on the spindle leading to air leaks and poor performance/mpg but until I see it I can't even guess
NorfolkMintySE wrote:where would i be sending it 2 ?