O.k. The story so far, just started modding my 6n4, clear front and side repeaters, green tinted rear cluster, lowered 40mm, smoked windows, 16 inch K2 rims. What I would like to know is, I desperately want to slam my ride, at least another 25mm. Question is I have only just bought the springs and realised it's just not low enough. I haven't done the shocks yet (gonna be next), I don't particularly want to buy another set of springs to lower it even more. Is there a way round this ???
Check out my baby below.
Lowering, Again!!!
-
The_phat_controlleruk
- Silver Member
- Posts: 309
- Joined: Sat Dec 03, 2005 10:40 pm
- Location: Gidea Park, Essex
- Contact:
Welcome to the forum, nice car u got there like the colour.
Ok first of I see from the pic you 6n mk4
I would wait a while as ur springs need to bed down, they will then drop slighty more..............
or get coil overs adjust them as low as u want, but stay away from cheap ones as they tend to rust in place.......
(Dam those poor alloys seriously kerbed
)
Ok first of I see from the pic you 6n mk4
I would wait a while as ur springs need to bed down, they will then drop slighty more..............
or get coil overs adjust them as low as u want, but stay away from cheap ones as they tend to rust in place.......
(Dam those poor alloys seriously kerbed
)-
The_phat_controlleruk
- Silver Member
- Posts: 309
- Joined: Sat Dec 03, 2005 10:40 pm
- Location: Gidea Park, Essex
- Contact:
-
][=][anson
- Bronze Member
- Posts: 163
- Joined: Fri Jul 01, 2005 3:09 pm
- Location: Wakefield Drives: '02 Golf Anni
-
The_phat_controlleruk
- Silver Member
- Posts: 309
- Joined: Sat Dec 03, 2005 10:40 pm
- Location: Gidea Park, Essex
- Contact:
-
][=][anson
- Bronze Member
- Posts: 163
- Joined: Fri Jul 01, 2005 3:09 pm
- Location: Wakefield Drives: '02 Golf Anni