lowering!!!!!!!!!!!!!!!!!!!!
-
danthemanpologti
- Bronze Member
- Posts: 201
- Joined: Mon Jan 16, 2006 12:21 am
- Location: derbyshire Drives: clio sport 172
lowering!!!!!!!!!!!!!!!!!!!!
if i lower my polo gti will it look a bit difrent and bit beter or wil it make no difrence at all as i have a steep drive and if i go to low it wil catch at the botom
-
mysteryboy
- Bling Bling Diamond Member
- Posts: 2673
- Joined: Sat Jul 02, 2005 11:46 pm
- Location: London Drives: MK4 8V Hates: Speed Bumps
- Contact:
-
danthemanpologti
- Bronze Member
- Posts: 201
- Joined: Mon Jan 16, 2006 12:21 am
- Location: derbyshire Drives: clio sport 172
Can't imagine 30mm will be too much of a drop to cause problem with your drive. I have a fairly steep drive which then levels out and i didn't have any probs when i was lowered about 75mm. I've now raised mine a little cause of local spped bumps tho.
I'm sure you could work out how much your able to lower, by working out the gradient of your drive and then working out height of splitter against distance from wheel.
Haven't done maths for a while so can't think how to work it out but that could give you an answer! Sure someone can help tho!
Failing that, park on the road or......demolish your drive and make it less steep!!!
Mat
I'm sure you could work out how much your able to lower, by working out the gradient of your drive and then working out height of splitter against distance from wheel.
Haven't done maths for a while so can't think how to work it out but that could give you an answer! Sure someone can help tho!
Failing that, park on the road or......demolish your drive and make it less steep!!!
Mat
-
danthemanpologti
- Bronze Member
- Posts: 201
- Joined: Mon Jan 16, 2006 12:21 am
- Location: derbyshire Drives: clio sport 172
i will probs be ok at 30mm but will it look any difrent? i went down the drive a bit quicker than normal the other day and it scraped and thats standard. ma older sister has a 1.8 bog sandard audi a3 and that scrapes unles she crawls down my mate has a s**t paxo and its lowered 75mm and he scraped his exahaust middle section at the top of the drive if he kept goin it wud of ripped it off or he wuda got stuck in a see saw fasion!!!!! so shal i drop it 30 and get down just or leave it as standard!!!!! wat im tryin to work out is will 30 mill look any beter?????
-
danthemanpologti
- Bronze Member
- Posts: 201
- Joined: Mon Jan 16, 2006 12:21 am
- Location: derbyshire Drives: clio sport 172
