Cambelt Quote
-
ModifiedMadness
- Sponsor
- Posts: 6769
- Joined: Tue Jun 14, 2005 8:38 pm
- Location: Bedford Drives: MK5 Golf R32
Cambelt Quote
I went to VW earlier and got a quote for the cambelt to be done (he said there's 2 belts and 2 tensioners?) which would be £405.95 incl parts and labour etc. but without the water pump.
He said that the price would only increase by however much the water pump is.
Also the 60K service is £202.65.
He said that the price would only increase by however much the water pump is.
Also the 60K service is £202.65.
-
olop_chris
- Sponsor
- Posts: 2131
- Joined: Wed Feb 01, 2006 11:15 pm
- Location: Derbyshire Drives: 270bhp .:R32
- Contact:
I'm having my 54k service due in the next week or so, and im guessing its probably safe to get the belts changed now. But when i was searching through the service book earlier it had a tick next to "toothed belt change" then a comment saying "both belts", that was at 34k. you reckon that would be it?
(sorry tom lol)
(sorry tom lol)
-
RICHARD HARPER
- Bronze Member
- Posts: 241
- Joined: Wed Oct 06, 2004 12:04 pm
- Location: Portlethen Aberdeen Scotland
- Contact:
-
ModifiedMadness
- Sponsor
- Posts: 6769
- Joined: Tue Jun 14, 2005 8:38 pm
- Location: Bedford Drives: MK5 Golf R32
May well be, as Richard says the best bet is to either give the garage that done it a bell or your local VW dealer should be able to check on their computer.olop_chris wrote:I'm having my 54k service due in the next week or so, and im guessing its probably safe to get the belts changed now. But when i was searching through the service book earlier it had a tick next to "toothed belt change" then a comment saying "both belts", that was at 34k. you reckon that would be it?
(sorry tom lol)
-
olop_chris
- Sponsor
- Posts: 2131
- Joined: Wed Feb 01, 2006 11:15 pm
- Location: Derbyshire Drives: 270bhp .:R32
- Contact:
on accelerating there a slight tapping that increases when pulling away... plugged it in to vag com and the cam shaft position sensor flagged an error so was assuming this was because belts are loose and tensioners going...Demo_202 wrote:Just wondering what you mean by 'tapping' ?
Cheers
Chris - these are the guys,
Volkspeed
Unit C, Taylor Lane Industrial Estate, Loscoe, Heanor, Derbyshire DE75 7TA
Tel: 01773 764089
scott
-
olop_chris
- Sponsor
- Posts: 2131
- Joined: Wed Feb 01, 2006 11:15 pm
- Location: Derbyshire Drives: 270bhp .:R32
- Contact:
-
ModifiedMadness
- Sponsor
- Posts: 6769
- Joined: Tue Jun 14, 2005 8:38 pm
- Location: Bedford Drives: MK5 Golf R32