Speakers

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 6:30 pm

Goin to get a new set of speakers for the polo and Im lookin at Focals. Anyone know what size I can get e.g. whats the size of the current ones?

Cheers lads

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 7:00 pm

the ones in the front are 16cm

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 7:18 pm

Will these fit ?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0013889704

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 7:26 pm

i doubt it.. they're 16.5mm which means they wont go into the alloted slots so you will have to either drill them yourself or get an adaptor from caraudiosecurty. I'd recommend the alpine speakers.. i have a set and they are crystal clear. make sure you get components

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 7:31 pm

Any chance they will squeeze in? They are like half a mm out like?

I also bidded on them which is another prob

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 7:38 pm

they're 5mms out which is quite a big deal in terms of spacing. Thats an equivalent of 2.5mm out in each hole, so that might mean them being loose. But if you win the auction, drilling holes isnt exactly hard.. just make sure you avoid the wires

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 7:53 pm

kk.....Cheers m8

ModifiedMadness · Post by **ModifiedMadness** » Mon Jul 31, 2006 8:01 pm

I thought the speakers in the 6N2 were 6 1/2 inches

If they were 16cm they'd be about 6.30 inches

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 8:06 pm

they're 16cms but they're classified as 3.5 inches if you have a look at the 3.5 inch speakers half of them are 16, some are 17 and some are 16.5 need to make sure before you buy them

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 8:15 pm

If they are out......What exactly do I need to do?

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 8:18 pm

the easiest thing would be to get the adaptors

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 8:21 pm

Link me m8

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 8:24 pm

Adaptors

or if you really want to improve your ride how about an induction kit?

Arnoldo · Post by **Arnoldo** » Mon Jul 31, 2006 8:28 pm

lol ur such a wee seller

Im goin to get the BMC one in the very near future m8 after my rims

MaxZ · Post by **MaxZ** » Mon Jul 31, 2006 8:29 pm

i thought they only did the BMC for the GTi.. would have got that instead of the K&N