Ollie's 1.0E (the new look)
-
DanDiesel
- Sponsor
- Posts: 3995
- Joined: Wed Aug 31, 2005 10:38 am
- Location: Kent Drives: VW Bora Highline
i found a set of 7" wide ones on ebay a while back! 16s and needed a damn good refurb but i got them for £112.
they are five stud tho and off a golf 20th anni! went to a local refurbed who said they would be £65 a corner for a polished rim and colour coded centre or £55 for a silver rim and cc centre!
they are five stud tho and off a golf 20th anni! went to a local refurbed who said they would be £65 a corner for a polished rim and colour coded centre or £55 for a silver rim and cc centre!
I finally have my new wheels, after my RXII's were theived by some scrotum-faced twunts
I was going to showcase them at the GTI Spring Festival, but I couldn't wait.



The first person to say "They're too common" will be bÃtch-slapped
And now for some pictures from yesterday's detail:


For higher-res pictures go to:
http://flickr.com/photos/oryan1/
I was going to showcase them at the GTI Spring Festival, but I couldn't wait.



The first person to say "They're too common" will be bÃtch-slapped
And now for some pictures from yesterday's detail:


For higher-res pictures go to:
http://flickr.com/photos/oryan1/
They were stolen from the garage at the end of my garden. Here's the thread about it:
http://www.tigerstyle.co.uk/poloforum/v ... hp?t=28646
They're 7's all round, ET37 with 195/45/15 Avon tyres. I used two of the spacers to give a bit of girth on the rear, they're spaced out 20mm on the back. I did run some at the front, but they were rubbing slightly, so I took them off.
I miss my RXII's, but you have to move on.
http://www.tigerstyle.co.uk/poloforum/v ... hp?t=28646
They're 7's all round, ET37 with 195/45/15 Avon tyres. I used two of the spacers to give a bit of girth on the rear, they're spaced out 20mm on the back. I did run some at the front, but they were rubbing slightly, so I took them off.
I miss my RXII's, but you have to move on.
Nope, I didn't get those. They were too much for meway_z wrote:I vaguely remember asking you about the spacers ages ago but can you remind me are they H&R forged aluminium which you got from DPM autostyling? I'm in the process of having my suspension sorted so will have to see whether I can stretch my budget for these too... will definitely let u kno, Cheers!
They're Simoni ones. I think they're aluminium, and they're hubcentric. They're multi-fitment, but not like the non-hubcentric pikey ones. They're all ready to fit on a VW, and the c/b is spot-on.
Phil, I want to get my passenger side mirror cap finished (3rd time lucky with spraying it
Maybe a Votex spoiler for the back, and my mate is bringing back a Hawaiian Lei for shows (the flowery wreaths you see in some retro/rat cars).
Other than that, I want to save my moolah for something slightly faster

