Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Chat about your 9n Polo (inc GT and Fun)
david burton
Bling Bling Diamond Member
Posts: 3082 Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:
Post
by david burton » Wed Apr 18, 2007 1:22 pm
Just been chatting to a fellow member about this, and I wondered if anyone knew the differences in the setup between the 3 platforms?
basically I'm selling FK coilovers and wondered if they can be advertised as suitable for the fabia etc etc?
chris4500uk
Bronze Member
Posts: 124 Joined: Tue Jan 09, 2007 10:00 am
Location: Middlesbrough
Post
by chris4500uk » Wed Apr 18, 2007 1:52 pm
i thought it was the same chassis?
Not 100% sure tho
AKs_SlickPolo
Gold Member
Posts: 823 Joined: Mon Jan 31, 2005 4:30 pm
Location: London. Drives: Silver 9N 1.4 16v
Post
by AKs_SlickPolo » Wed Apr 18, 2007 2:05 pm
Quite sure the Ibiza 6L, Fabia and Polo 9N coilovers are all the same. As chris4500uk says its the same chassis. Not sure if spring rates are different though
david burton
Bling Bling Diamond Member
Posts: 3082 Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:
Post
by david burton » Wed Apr 18, 2007 2:06 pm
spring rates shouldn't matter a huge amount - as the coilovers are adjustable you only get one set for the whole range.
just that DanDiesel mentioned that the Ibiza ones are differently priced to the others.
DanDiesel
Sponsor
Posts: 3995 Joined: Wed Aug 31, 2005 10:38 am
Location: Kent Drives: VW Bora Highline
Post
by DanDiesel » Wed Apr 18, 2007 5:44 pm
from what i remember that is?
could always check the prices on venom's website now to check to see if they are still the same differences!
david burton
Bling Bling Diamond Member
Posts: 3082 Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:
Post
by david burton » Wed Apr 18, 2007 6:03 pm
yeah I had a quick butchers and they were the same price but different part numbers.....
hmmmm
AKs_SlickPolo
Gold Member
Posts: 823 Joined: Mon Jan 31, 2005 4:30 pm
Location: London. Drives: Silver 9N 1.4 16v
Post
by AKs_SlickPolo » Wed Apr 18, 2007 6:07 pm
Well the top mounts and bearings of the 9N are the same as the Ibiza. So is the rears. Not 100% whether they fit the same way on the hub assembly at fronts though, but I think they do.