Alarm help *hazard light*

Chat about your MKV (6N2) Polo
Post Reply
s-l-i-x
Bronze Member
Posts: 180
Joined: Tue May 01, 2007 6:51 pm
Location: Bexleyheath Kent

Alarm help *hazard light*

Post by s-l-i-x »

Hi, I've fitted an alarm on my polo and its works fine apart from we dont know where the hazard light output is on the car?.....

Does anyone here know? Cheers :lol:
PD
Silver Member
Posts: 326
Joined: Sun Apr 29, 2007 1:01 am
Location: Wimborne, Dorset, UK

Post by PD »

When i fitted my Remote locking kit it had two wires for the flashers, one goes off to the left side lights and the other goes to the right indicatiors. you should be able to find those cables in the loom in the front i connected mine directly onto the wires in the boot going into the rear lights.

dont know if this helps.

you best bet is getting a haynes manual and looking at the wiring diagrams.
s-l-i-x
Bronze Member
Posts: 180
Joined: Tue May 01, 2007 6:51 pm
Location: Bexleyheath Kent

Post by s-l-i-x »

Ok might just run a cable to the rear lights, thanks for that
PD
Silver Member
Posts: 326
Joined: Sun Apr 29, 2007 1:01 am
Location: Wimborne, Dorset, UK

Post by PD »

s-l-i-x wrote:Ok might just run a cable to the rear lights, thanks for that
well the loom runs to the front of the car, not quite sure where you can find the cables.

I think you can possibly connect the cables onto the hazard light switch.
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Post by alexperkins »

Indicator wires are Black/White and Black/Green in the big loom under the dash! :D
s-l-i-x
Bronze Member
Posts: 180
Joined: Tue May 01, 2007 6:51 pm
Location: Bexleyheath Kent

Post by s-l-i-x »

Ok thanks PD & Alex :D
Post Reply