Induction Kit

Mk4_Scotland · Post by **Mk4_Scotland** » Thu Jan 29, 2004 6:51 pm

Any1 know who sells the inductions pipes that come from the throttle body down to the big gap at the left hand side of the engine? Don't want a little cone sittin on top of my engine looks crap and doesn't get enough cold air! P.s 1.4 8v

KarlM · Post by **KarlM** » Thu Jan 29, 2004 8:37 pm

I looked into it a while back and couldn't find anything, but you could look at customising a Bonrath PowerRohr from a Golf to the original filter housing

Post by **Josh_PoloGTi** » Thu Jan 29, 2004 8:58 pm

I made my own using silicon hosing and metal tubing.

hardhitter · Post by **hardhitter** » Thu Jan 29, 2004 9:10 pm

Thats probably the best idea from Josh.

All you need to do is measure the diameters, lengths and angles needed, then work out where the filter will go and stick a suitable size cone on the end.

simon pope · Post by **simon pope** » Fri Jan 30, 2004 9:39 am

when u buy an induction kit u generally get some sort of hosin with it, wot i did was use the hose for ya RAM air induction, next to the radiator there is a plastic cover, cut a hole in that the same size as the hose and feed it through upto ya front grill u should get maximun suction then!!!!

Mk4_Scotland · Post by **Mk4_Scotland** » Fri Jan 30, 2004 6:52 pm

cheers guys, nice quick reply fo my first post!

KarlM · Post by **KarlM** » Fri Jan 30, 2004 8:53 pm