Alarm help
-
- New
- Posts: 29
- Joined: Wed Dec 07, 2005 1:30 pm
- Location: sheffield
Sorry not on top with conlog alarms ar they still going?astirl2809 wrote:Hi.
My wife's P reg polo 1.4 CL is fitted with a ?conlog immobiliser. Shes getting pretty fed up with the 'double beep' when the locks unlock and the 'single beep' when it locks.
Any way of turning the sound off so that just the indicators flash.
cheers
Ian
Hi I have an aftermarkey remote locking upgrade that plugs straght into the central locking pump which works a treat.
I want to know how I can get my hazzards to flash when I lock/ unlock it.
I know the unit can do it as u can hear the realay click as if it would flash the lights.
It has these wires to do it but I dont know where to connect them
RED (-)
Black (+)
Then it says (blinker)
and has two brown wires
I am guessing these brown wires are the ones that will flash the lights but i dont know where to connect them
I know this sounds confusing but the instructions are in german
I want to know how I can get my hazzards to flash when I lock/ unlock it.
I know the unit can do it as u can hear the realay click as if it would flash the lights.
It has these wires to do it but I dont know where to connect them
RED (-)
Black (+)
Then it says (blinker)
and has two brown wires
I am guessing these brown wires are the ones that will flash the lights but i dont know where to connect them
I know this sounds confusing but the instructions are in german
Hi I have an aftermarket remote locking upgrade that plugs straght into the central locking pump which works a treat.
I want to know how I can get my hazzards to flash when I lock/ unlock it.
I know the unit can do it as u can hear the realay click as if it would flash the lights.
It has these wires to do it but I dont know where to connect them
RED (-)
Black (+)
Then it says (blinker)
and has two brown wires
I am guessing these brown wires are the ones that will flash the lights but i dont know where to connect them
I know this sounds confusing but the instructions are in german
I want to know how I can get my hazzards to flash when I lock/ unlock it.
I know the unit can do it as u can hear the realay click as if it would flash the lights.
It has these wires to do it but I dont know where to connect them
RED (-)
Black (+)
Then it says (blinker)
and has two brown wires
I am guessing these brown wires are the ones that will flash the lights but i dont know where to connect them
I know this sounds confusing but the instructions are in german
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact: