RM alloys
RM alloys
Guys,
A set of Rms, 16"x7.5, et18, 5x120.
I have RS001 atm, 15x7.5,15x8, et38, 4x100.
They stick out a bit, as you've seen in the members ride section, but its cool.
Whats the deal with these rms? will they fit with pcd adapters of 15mm? or 20mm? or is it a no go area and should i ask for the same but in 15"s, 4x100?
ET38 on 7.5 gives an ET of 33ish
ET38 on 8 gives an ET26
with ET18 and 20mm adapters, thats an ET-2
That is a massive difference init? Although i have been told it fitted on a mk2 golf with 20mm adapters.
Matt
A set of Rms, 16"x7.5, et18, 5x120.
I have RS001 atm, 15x7.5,15x8, et38, 4x100.
They stick out a bit, as you've seen in the members ride section, but its cool.
Whats the deal with these rms? will they fit with pcd adapters of 15mm? or 20mm? or is it a no go area and should i ask for the same but in 15"s, 4x100?
ET38 on 7.5 gives an ET of 33ish
ET38 on 8 gives an ET26
with ET18 and 20mm adapters, thats an ET-2
That is a massive difference init? Although i have been told it fitted on a mk2 golf with 20mm adapters.
Matt
-
shantybeater
- Bling Bling Diamond Member
- Posts: 2149
- Joined: Mon Oct 23, 2006 12:24 pm
- Location: Bournemouth Drives: 6n2 TDi
you talking about the 16" RM's on edition 38? they are seriously lush!, they would fit with adapters...i'm holding out for a 4x100 set of 16" RS's but they are rare as fook
if you have a choice stick with the 15" RM's/RS in 4x100, they wont stick out as much & you can get alot more dish for the amount of width
16" rims that are 7.5 standard WITH adapters are going to cause alot of scrubbing especially on the front
if you have a choice stick with the 15" RM's/RS in 4x100, they wont stick out as much & you can get alot more dish for the amount of width
16" rims that are 7.5 standard WITH adapters are going to cause alot of scrubbing especially on the front
rms
Ye the ones on edition38 - they are the nuts!!
I've never seen a 16" RM in 4x100!!
my RS as it now, stick out about an inch or so, but its cool.
are they gonna scrub proper bad?
they were on a mk2 golf and nick the guy said it was sweet.
I've never seen a 16" RM in 4x100!!
my RS as it now, stick out about an inch or so, but its cool.
are they gonna scrub proper bad?
they were on a mk2 golf and nick the guy said it was sweet.
-
shantybeater
- Bling Bling Diamond Member
- Posts: 2149
- Joined: Mon Oct 23, 2006 12:24 pm
- Location: Bournemouth Drives: 6n2 TDi
RM's
and what condition are your RM's in?
You should see these on edition..they are the nuts!!
I can get custom made adapters 15mm....and then it might look like 8's all the way round the car... or is that being too optimistic??
You should see these on edition..they are the nuts!!
I can get custom made adapters 15mm....and then it might look like 8's all the way round the car... or is that being too optimistic??
RM's
My RS001's need so much work - new dishes - if i go for stainless, im looking at £105 a dish - thats £400+ right there!
The deal I got here is:
My wheels in its condition with T1 tyres + 1 new dish i bought (one dish is curbed) + £475...
and in exchange I'll get:
*a set of 15x7 RA's polished with tyres
*a set of 16x7.5 polished RM's 5x120 (only 2 in the country)
I got to buy 15mm adapters mind you @ £200
I just wanted a winter set and the lush RM's for shows.
Shall I stick with my RS's?
The deal I got here is:
My wheels in its condition with T1 tyres + 1 new dish i bought (one dish is curbed) + £475...
and in exchange I'll get:
*a set of 15x7 RA's polished with tyres
*a set of 16x7.5 polished RM's 5x120 (only 2 in the country)
I got to buy 15mm adapters mind you @ £200
I just wanted a winter set and the lush RM's for shows.
Shall I stick with my RS's?
Last edited by mattyy on Fri Apr 11, 2008 10:06 am, edited 1 time in total.
