STAGE 2 Re-Map or Audi TT Turbo??

Harnz · Post by **Harnz** » Sat Apr 26, 2008 5:41 pm

does APR or Awesome GTI do the stage to remap yet as i rang a while back at awesome and they said they dont do it but its on their website.

also: http://driving.timesonline.co.uk/tol/li ... 639727.ece

if you scroll down closer to the bottom of the article Jeremy Clarkson says "This comes with a 148bhp version of the turbocharged 1.8 litre 20-valve engine that produced 237bhp in the old Audi TT. So why not simply change the map and, hey presto, you have a 237bhp Polo. Wow. With something like that, you could bend time."

is this true as i fort it was the golf engin unless they ll have the same powerplant engin just differen turbos. if so can a audi TT turbo b slapped on the polo?

KennyPOLO_Gti · Post by **KennyPOLO_Gti** » Sat Apr 26, 2008 6:12 pm

APR dont have a stage two map for the polo.

For stage two u will need to upgrade ur TIP, exhaust, dump valve, pd160 ( i think ) and a FMIC! Oh and ur suspension and brakes would be recommended!

Not sure bout upgrading ur turbo as i have read about that the K03s can handle the extra boost, dont quote me on that tho.
The 1.8T 225bhp run with a larger turbo K04

bramley · Post by **bramley** » Sat Apr 26, 2008 8:31 pm

get a custom remap!

Jeff GTi · Post by **Jeff GTi** » Sat Apr 26, 2008 9:38 pm

as kenny says, there is no upgrade stage 2 map yet untill demand increases and things like front mounts and other essential tuning parts are more regularly available, they also have to make the map yet too

with the apr map, improved induction inlet, green filter, forge 007p dv, forge tip, forge intercooler hose, n75j valve, miltek turbo back exhaust including high flow cat and downpipe my car produced 222.5 bhp and over 210 at the wheels !!! and thats with the standard k03s turbo,

its just lacking the intercooler to go even further, but even now its mighty responsive and has bullet like acceleration

but i have also as kenny says upgraded the brakes and suspension to match the performance, as i want to be able to stop and handle as well as go

i chose the 312 mm golf iV gti anniversary setup with tarox pads, sport japan disks, goodridge s/s brake hoses, and for stability, i chose eibach coilovers with jabbasport rear arb, poly bushes all round, front and back forge motorsport strut braces etc

going quick is a thrill, but being in control is priceless

Harnz · Post by **Harnz** » Sun Apr 27, 2008 1:30 am

thanks for the info guys really helped and jeff how much did that little lot set you back?? if you don't mind me askin

KennyPOLO_Gti · Post by **KennyPOLO_Gti** » Sun Apr 27, 2008 2:17 am

Jeff GTi wrote:its just lacking the intercooler to go even further, but even now its mighty responsive and has bullet like acceleration

What about the Pikey Mod?

Jeff GTi · Post by **Jeff GTi** » Sun Apr 27, 2008 11:37 am

kenny - pikey mod?

and the full setup for the engine and breathing mods was roughly Â£ 1250

and roughly Â£1000 for the brakes and chassis

Harnz · Post by **Harnz** » Sun Apr 27, 2008 12:17 pm

wow thats quite abit of money and ebay is rubbish for parts for this car so that makes it worse so your car must be a real rocket, must scare alot of silly ppl trying to race you i kno i have.

KennyPOLO_Gti · Post by **KennyPOLO_Gti** » Sun Apr 27, 2008 3:32 pm

Pikey Mod ---> http://www.briskoda.net/forums/fabia/pi ... low/47646/

KennyPOLO_Gti · Post by **KennyPOLO_Gti** » Sun Apr 27, 2008 3:34 pm

TT's have this mod as standard i think

Tim_GTi · Post by **Tim_GTi** » Sun Apr 27, 2008 4:08 pm

KennyPOLO_Gti wrote:Pikey Mod ---> http://www.briskoda.net/forums/fabia/pi ... low/47646/

Haha that's cool, would shred your tyres if you were slam on big wide boys though!

andy947 · Post by **andy947** » Sun Apr 27, 2008 5:10 pm

KennyPOLO_Gti wrote:TT's have this mod as standard i think

Check out an Ibiza drivers side ach liner

And No, before anye asks it wont fit the Polo.

kc · Post by kc » Sun Apr 27, 2008 5:31 pm

lol
that pikey mid is full on pikey lol

i had pikey mod (another version) on my first gti

but intead of drilling holes like he has and i drilled loads of little holes and didnt nother with that metal air panelling thingy ma jig...

but as andy says... check the ibiza.... im sure it will fit with a little bit of cutting...

Jeff GTi · Post by **Jeff GTi** » Mon Apr 28, 2008 12:52 am

harnz, yeah its pretty nippy haha

kenny & kc, i may have to look in to this, as it seems to get fair feedback from ibiza and vrs users, i would have to do it neater though, looks a little messy just like that, would look better mounted from the other side, so just the vents are on show maybe?

Tim_GTi · Post by **Tim_GTi** » Mon Apr 28, 2008 4:21 am

Jeff GTi wrote:
kenny & kc, i may have to look in to this, as it seems to get fair feedback from ibiza and vrs users, i would have to do it neater though, looks a little messy just like that, would look better mounted from the other side, so just the vents are on show maybe?

Yeh I agree with that, the finish looks like a cheap office air con unit.