Key/Remotes

Chat about your MKIV (6N) Polo
Post Reply
User avatar
Torq-Al
Gold Member
Posts: 764
Joined: Thu Apr 24, 2008 10:52 pm
Location: Torquay, South Devon

Key/Remotes

Post by Torq-Al »

Went & looked at a ’96 mk4 Polo, which is really tidy & extremely clean. Documented low mileage, main dealer history until recently, local reg etc.
One slight downer is it only has one key/remote, how easy is it to get a replacement, main stealer job or can I get a blank, have it cut & then program it at the stealers or via VAG-COM myself ?
polo-sib
Gold Member
Posts: 536
Joined: Mon Feb 04, 2008 11:11 pm
Location: Dartford

Post by polo-sib »

A new blank key and cut would cost you around £5-10, but the key would not contain an immobilizer chip.

So best thing to do is find a blank key with an immobilizer chip, good places for this would be ebay. Once you got a blank key with immobilizer chip you will need to get it cut, this will cost you no more than £5. The next bit is expensive, the programming of the immobilizer chip would cost somewhere between £52-82 (the price is dependent on whether you know the 5 digit code to the car) if the security code is not known then go dealership. Expect to pay around £82, also you will require all documents to the car and personal details as well as the car needs to be bought down when getting the key programmed.
User avatar
NOZ
Platinum Member
Posts: 1652
Joined: Fri Feb 02, 2007 11:43 am
Location: East London
Contact:

Post by NOZ »

The one with the chip is a 'transponder key' I believe. I had a second key made from the single one I had which cost £35 to get it programmed and cut.
User avatar
Torq-Al
Gold Member
Posts: 764
Joined: Thu Apr 24, 2008 10:52 pm
Location: Torquay, South Devon

Post by Torq-Al »

NOZ wrote:The one with the chip is a 'transponder key' I believe. I had a second key made from the single one I had which cost £35 to get it programmed and cut.
Where did you go to have it programmed, as i don't want to spend the 'stealers' the money if i can help it :lol:
User avatar
NOZ
Platinum Member
Posts: 1652
Joined: Fri Feb 02, 2007 11:43 am
Location: East London
Contact:

Post by NOZ »

well I got it done in Leytonstone from a key cutters. Depends where you live at the end of the day!
solidsponge
Bronze Member
Posts: 155
Joined: Tue Sep 05, 2006 11:43 am

Post by solidsponge »

I got one for £20. Small electrical car shops are cheapest I guess.
Post Reply