How do you remove the original head unit?
- Trottagti
- Bling Bling Diamond Member
- Posts: 2050
- Joined: Mon Feb 04, 2008 7:58 pm
- Location: Chelmsford, Essex.
How do you remove the original head unit?
Cant find a diy or anything or am i just crap at looking lol!!!!???!!!
Can u just plug n play with the head unit u have just baught or do u need special gizmos on the polo, havent fitted one to a polo yet!!! x
Can u just plug n play with the head unit u have just baught or do u need special gizmos on the polo, havent fitted one to a polo yet!!! x
OK, first of all can you write full words, as it's difficult to understand abbreviations at time.
A change of headunit will give you a boost in volume level, as the aftermarket speakers come with built in amplifier, hence the output increase from around 6w to about 4x50w.
If you want to achieve significant upgrades, you'll need more than a headunit
A change of headunit will give you a boost in volume level, as the aftermarket speakers come with built in amplifier, hence the output increase from around 6w to about 4x50w.
If you want to achieve significant upgrades, you'll need more than a headunit
Start with the headunit, then look at upgrading your front components, next dicsonnect the rear speakers and finally install an amp and sub to complete the upgrade. That's your basic route to a decent little install!
THe standard headunit can be removed with cut-up bits of credit card, its not easy though
you're best bet is to get a set of removal keys off eBay or get your local dealership or audio specialist to help, as MaxZ says.
THe standard headunit can be removed with cut-up bits of credit card, its not easy though

