Alfa Romeo 15" Rims

NOZ · Post by **NOZ** » Sun Jun 29, 2008 10:19 pm

You've only just put them on so keep them as they are until your bored!

They have plenty of potential for future changes too. Kinda the similar style as the Porsche teledials, which are common on dubs. You've gone your own way and these look superb mate, well done

iggy350 · Post by **iggy350** » Sun Jun 29, 2008 10:20 pm

NOZ wrote:You've only just put them on so keep them as they are until your bored!

They have plenty of potential for future changes too. Kinda the similar style as the Porsche teledials, which are common on dubs. You've gone your own way and these look superb mate, well done

Thanks mate much appreicated

R1CH · Post by **R1CH** » Sun Jun 29, 2008 11:30 pm

awesome!

Josh_polo · Post by **Josh_polo** » Wed Jul 30, 2008 5:42 pm

I need your help!

Im about to buy a set of these ( the cirlces on my ones are more streched but its the closest design)

What whould i need to make them fit?

NOZ · Post by **NOZ** » Thu Jul 31, 2008 12:31 pm

You'll need wobbly bolts mate.

Josh_polo · Post by **Josh_polo** » Thu Jul 31, 2008 5:55 pm

NOZ wrote:You'll need wobbly bolts mate.

Is that it

NOZ · Post by **NOZ** » Fri Aug 01, 2008 10:53 am

Yep, forgot what PCD Alfa's have but its slightly different from dubs so wobbly bolts will will bend through the hole and align itself to the hubs.

If its a 5 stud PCD on the rims then you'll need adaptors and then wobbly bolts too I reckon.

Josh_polo · Post by **Josh_polo** » Fri Aug 01, 2008 11:09 am

Nope these are four studs already checked

NOZ · Post by **NOZ** » Fri Aug 01, 2008 2:32 pm

Then wobbly bolts at around Â£25-Â£35 it is!

Josh_polo · Post by **Josh_polo** » Fri Aug 01, 2008 2:39 pm

A set?

Cause ill need 16 but then i also thought about locking wheel nuts as i dont fancy my wheels going bye bye.

iggy350 · Post by **iggy350** » Fri Aug 01, 2008 9:18 pm

full set of 16 wobbly bolts + 4 of them being locking wheel nuts set me back about Â£56 i think

Josh_polo · Post by **Josh_polo** » Sun Aug 03, 2008 7:28 pm

Hopefully should be going to get these tomorrow, if im not at work.

Planning on getting them refurbed diamond cut with black inserts.

polo-sib · Post by **polo-sib** » Sun Aug 03, 2008 7:38 pm

Josh what breakers you go too?