fitting indicators

[george-225]

i have just bought some clear indicator covers for my 1996 polo 6n, and want to fit them, but dont know how to go about it.

help please?
thanks

[lolhoward]

Side indicators - just pop out. Prize one side out and they should just pop out. Then just push in the new ones.

Front - if the same as Mk5 you pull the pin up (under the bonnet in between the headlighst and indicators) and then just pull them forwards (beware of breaking the plastic clips). I did this on my old Mk4 but cant remember if its the same, sure it is.

[RandonGUY]

If you are talking about side repeaters;

Push them towards the rear of the car, they should just push out. Look in the manual, it gives a nice diagram.

Then, un-clip the old bulbs, and fit the new one in.

If you are talking about front side indicators;

http://www.uk-polos.net/view ... =10&t=2148


Hope that helps!

[george-225]

thanks guys ill give that a crack this weekend.=)

[lolhoward]

Screwed down, not plastic screw/clip. Knew it was simular. You cant go wrong mate, peice of cake.