PLEASE HELP

[braindeadhmster]

Connected blue to brown/white where do i connect purple (negative trigger)

[alexperkins]

You dont lol. Thats just an option for different cars. Cars either have a positive or negative door light system. Polos are positive, so just tape the negative lead up as you dont need to use it.

[braindeadhmster]

And finally wat color is my ACC on wire and whre do i connect it

[alexperkins]

I *think* its brown red. Its the really small wire that comes out of the ignition switch. If its not that, its black yellow

[braindeadhmster]

Hi tried them but aint work. I need the wire that tells the alarm the engines running (if you get wat i mean)
Thanks for all the help alex. It`s much apreciated.

[alexperkins]

Have you got a multimeter mate?

[braindeadhmster]

No i`ve got a screw driver you earth then put to wire if theres power the light comes on

[alexperkins]

Take a look at the plug on the back of the ignition switch - there are a few thin cables. What are the colours?

[braindeadhmster]

I`ve been told i can connect it to the wire on my cd player that turns cd player on wen ign on. What wire will this be?

[alexperkins]

Thats brown red mate. As i said originally?

[braindeadhmster]

Connected it to brown/red. But wen car running the alarm goes off cause the vibration sensor triggers.

[alexperkins]

Hmmm. Have you tested it with ure screwdriver thing to ensure there is a feed on it when the ignition is on?

[braindeadhmster]

Yeah no power on either. Apparently there is 2 wires going in to my cd player, red is constant live, yellow is ign live. If i connect it to the yellow would it do same job.

[alexperkins]

You could, but that is connected to brown red coming from the ignition switch lol!

Does your radio switch on and off with ignition

[braindeadhmster]

Yeah radio turns on wen i turn key.