PLEASE HELP

[alexperkins]

Connect it to that one then. Wierd tho - its the same lead!

[braindeadhmster]

I haven`t checked it yet it might not work. What else could cause it to that.

[siilver]

i bought the same sort of kit the other day, but i just bought the keyless entry, but i tired out the flash light, and it didnt work right or i didnt do it right?

whats the best way to do it so the indecaters* flash when you open and close the car?

and do i need the cable to make the windows go up??

[braindeadhmster]

Take panel out were radio is, your hazard switch will click out connect brown to Black/white + other brown to Black/Green. then it`ll work.

[siilver]

Take panel out were radio is, your hazard switch will click out connect brown to Black/white + other brown to Black/Green. then it`ll work.

is that easy to pull out? or where is the unit that controls the lights

[alexperkins]

Its a few screws, or you can just connect it to the loom that runs down from the steering column instead.

[siilver]

ah right cool cool. going to give it a go today and get it down
il let you know how it goes

[siilver]

everything working other than the windows uper bit, it doesnt say what colour of the wire is.

but its a great job. but the wires in the dash were, blacl/green and black/white

[alexperkins]

I beleive you need another module for total closure in the polos. Its standard on the GTI, but im not sure if lower models have it.

[siilver]

mine works with the keys. but il look in to it


ah something like this ??
http://www.rclick.co.uk/product_info.ph ... cts_id=279

[braindeadhmster]

I have the same prob. Let me know how you do it mate