Sump plug located at rear of sump 6mm hex.
Filter sat at end of your nose, after popping bonnet.(Big black nut moulded to top of domed housing)
Mine was hand tight so no need for any socket.
Before you undo and remove housing put a cloth on top of alternator which sits below filter. Stops oil running onto it.
Filter was a bit of a pull off housing, snug fit.(Take note of position of filter before removal, then when you fit new one you will no exactly how far down it sits) Remove rubber gaket at top of thread, and replace with new.
Put on new filter, once again snug fit, so a very firm even push down.
I cleaned up puddle of oil in housing, before replacing filter.
Add new oil not forgetting to replace sump plug before you do so.
1 to me, 0 to the dealer
rs2315.

