Polo 9n3 angel eyes - HELP

[umar-dub]

Hi All,

I recently bought a pair of angel eyes for my polo 9n3.

I have a slight issue which im hoping someone on the forum might be able to help

The problem is the rings have stopped working and so have the 3 leds on the top strip.

I have had a look at the wiring an does have a couple of wires that have come out of place.

Would anyone have some pictures of how the rear looks (wiring) of these polo angel eyes for the 9n3 so i know which wire goes where as i have tried nearly all the combinations possible but none of them work and the rings and the LEDs do not work. The indicator and the main beam aswell as the flash work fine its just when you have the sidelights on nothing shines up, checked the fuse there fine.

If i dont have no luck ill just sell them as spares or repairs or give them to an electrician who might be able to help..

[BennoGTi]

You mean the wires going in to the connector attached to the headlights when you bought them?

Ill take a picture of mine when I get home from work, unless someone has done it by then

[umar-dub]

You mean the wires going in to the connector attached to the headlights when you bought them?

Ill take a picture of mine when I get home from work, unless someone has done it by then

Yeah thats right where the wires going to the connector there is a white wire that comes out of the block connector but is not connected to nothing and i know it connects to another wire but theres quite a few loose wires.

Im just uploading some pictures to show you exactly what im talking about because me explaining it in words i dont think im making it clear what i mean

[umar-dub]

Much more pictures here of the wiring issue:

http://s792.photobucket.com/albums/yy20 ... EL%20EYES/

[BennoGTi]

From what I can remember, you need to pick from the black ones which of the lights you want on

Angels, LED spot, LED strip

On mine I just have the Angels and LED spot, so my LED strip is disconnected

Hopefully these pics will help you sort it, if you need any more just let me know








I soldered then heat shrinked mine:

[umar-dub]

Hi there,

Thanks for the pictures now im going to print them out and going to try to make some sense out them.. Ill keep you updated how i get along (going to try this on the weekend)

Thanks once again mate

[umar-dub]

BennoGTi <---- Thanks alot dude, These are not working all wired up by my mechanic by showing these pictures to him, he did in 2 mins using these crimps.
But now these a slight issue everything works fine but the 2 leds on the top right of the light are not working on 1 of the headlights, iv been told the resistors thats taped up in black might be faulty so need 2 cut that out and take it to Maplins and re-solder a new one which will hopefully sort the issue out

[Gtimatt]

post a pic when you have them fully working and fitted mate, would like to see what they look like

[umar-dub]

I will do

Just waiting when the weather is right then going to these angel eyes on.

Might sell these and buy the devil eyes (audi style)

[BennoGTi]

post a pic when you have them fully working and fitted mate, would like to see what they look like

Can take some pictures of mine if your just looking to see some in action

[Gtimatt]

post a pic when you have them fully working and fitted mate, would like to see what they look like

Can take some pictures of mine if your just looking to see some in action

yeaahh, ive never seen them on a polo!

[umar-dub]

This is when i first put the lights on and realised the l.e.ds were working DOH:



Plus iv added the lowe gti grilles and fogs since then <-- must have on your polo 9n3