Newb here,couples of questions,,fogs/imobillizer 6n2

Discuss In Car Electronics / Electrical Systems - use with caution!
Post Reply
User avatar
craggles
New
Posts: 29
Joined: Sun Feb 27, 2011 5:28 pm
Location: MANCHESTER

Newb here,couples of questions,,fogs/imobillizer 6n2

Post by craggles »

Hello new here,,just got a 6n2 w 2000 polo 1.4 16v s

Im wanting to fit fogs as its all colour coded and think it will set the front of--is the wiring already there for them behind the bumpers (i know i need the switch in the dash)

And im fitting an after market alarm,,but does this polo have a imobillizer as standard from the factory does anyone know?

will save me cutting in to ignition wire and fitting a relay if it has

thanks everyone

craig,,im form prestwich manchester,,hope to come on a meet if there is any in the future
User avatar
craggles
New
Posts: 29
Joined: Sun Feb 27, 2011 5:28 pm
Location: MANCHESTER

Re: Newb here,couples of questions,,fogs/imobillizer 6n2

Post by craggles »

found the imoboilizer info out,,just getting conflicting info on the spot lights,,hopefully get change this weekend to check if the wires are there
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Newb here,couples of questions,,fogs/imobillizer 6n2

Post by alexperkins »

Welcome to the forum mate

The 6n2 has a transponder immobilizer fitted as standard

As for the fogs, the wiring is all done. You just need to add the fogs and a new switch that supports front fogs.
User avatar
craggles
New
Posts: 29
Joined: Sun Feb 27, 2011 5:28 pm
Location: MANCHESTER

Re: Newb here,couples of questions,,fogs/imobillizer 6n2

Post by craggles »

Thanks for the help,I found the wires for the fogs,so im going to now hunt some down for a good price if i can :D
Post Reply