Replacing stereo

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
Hoves
New
Posts: 4
Joined: Sat May 07, 2011 11:50 am

Replacing stereo

Post by Hoves »

Hey guys, recently bought an 06 1.2 Polo and want to add a decent stereo that I can use to listen to my ipod whilst on the move.

Got a budget of around £130-£140 and just want to check I'm ordering the right parts so I don't have to mess about with sending stuff back. Here's what I was going to order:

- http://www.caraudiodirect.co.uk/kenwood-kdc455uw.html
- http://www.bluespot.co.uk/car-audio.asp ... 75-adaptor
- http://www.vaglink.com/VAG/Polo_9N2_9N3 ... lo_9N3.htm

Don't really want to be messing about with re-wiring stuff as my knowledge is rubbish so I thought this adapter would be good.
Is the stereo the best I can get within my budget? not looking to spend more than £100 on it
And any idea on the shipping costs from vaglink?

Thanks
User avatar
blazeguarder
Gold Member
Posts: 701
Joined: Wed Jan 20, 2010 5:21 pm
Location: London

Re: Replacing stereo

Post by blazeguarder »

That adapter looks like a standard quadlock (the name of the 9N3 wiring plug) to ISO (generic fitment) adapter to me? Needs a bit of wiring - you'll probably need to connect a wire to an ignition live to get the radio to turn on/off and to remember it's settings.

It isn't particularly difficult wiring, but if you want complete plug and play, then you need a can-bus adapter for £35. Magic stuff, literally plugs in and then you plug the radio into it. I use the Connects2 CTSVW003 for mine. Their website suggests the CTSVW002 for the Polo but I found only the 003 worked on mine!

The rest of it looks good, you can get the storage tray from VW direct though, might save you some waiting/cash to customs. Last time I bought from Vaglink, customs took a wedge of cash for the privilege! Be warned...
Hoves
New
Posts: 4
Joined: Sat May 07, 2011 11:50 am

Re: Replacing stereo

Post by Hoves »

blazeguarder wrote:That adapter looks like a standard quadlock (the name of the 9N3 wiring plug) to ISO (generic fitment) adapter to me? Needs a bit of wiring - you'll probably need to connect a wire to an ignition live to get the radio to turn on/off and to remember it's settings.

It isn't particularly difficult wiring, but if you want complete plug and play, then you need a can-bus adapter for £35. Magic stuff, literally plugs in and then you plug the radio into it. I use the Connects2 CTSVW003 for mine. Their website suggests the CTSVW002 for the Polo but I found only the 003 worked on mine!

The rest of it looks good, you can get the storage tray from VW direct though, might save you some waiting/cash to customs. Last time I bought from Vaglink, customs took a wedge of cash for the privilege! Be warned...
Thanks for your response.

In the description of the adapter, it says "Solves 'memory loss' problems where the replacement radio forgets its preset station settings or clock time" I hope this means that it remembers its settings and turns the radio on and off when the ignition is set.
User avatar
whitegtipolo
Bling Bling Diamond Member
Posts: 2262
Joined: Mon Mar 10, 2008 5:09 pm
Location: 270bhp 9n3 1.8t cr turbo

Re: Replacing stereo

Post by whitegtipolo »

Correct buy the Adaptor but you can wire up to ciggy lighter but if you no idea bout wiring don't bother :wink:
Post Reply