Polo GTI 9N3 250BHp whats needed?
Polo GTI 9N3 250BHp whats needed?
Hello
I'm very new to performance modding i just bought a 1.8 GTI 9n3 and want to take it to 250 BHP i just want some information about the engine parts i will need to buy put on remaps are one way but i want the engine to sound sweet!!!
what parts would anyone suggest?
I'm very new to performance modding i just bought a 1.8 GTI 9n3 and want to take it to 250 BHP i just want some information about the engine parts i will need to buy put on remaps are one way but i want the engine to sound sweet!!!
what parts would anyone suggest?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Polo GTI 9N3 250BHp whats needed?
I think the most powerful gti of all the 9n3 gtis is on belonging to a member called vlad_pvs... His build thread is entitled: Vw Polo GTI 1.8 Turbo GT3071 Revo stage3. Any mods your going to need to do to get your gti to that bhp has probs already been done by vlad so have a look as his thread!
Re: Polo GTI 9N3 250BHp whats needed?
I would like to correct your on thatsMODDED9N wrote:I think the most powerful gti of all the 9n3 gtis is on belonging to a member called vlad_pvs... His build thread is entitled: Vw Polo GTI 1.8 Turbo GT3071 Revo stage3. Any mods your going to need to do to get your gti to that bhp has probs already been done by vlad so have a look as his thread!
member. I think he is running a GT40 if I am not wrong.
For you to reach 240 you would need the following:
FMIC,
Turbo intake and Throttle body hoses,
DV,
Turbo back 3" exchaust setup
Clutch depands if the current one is in good nick i.e. not slipping
and obiviously the Stage 2 mapping software
Ko3s turbo is good for 240BHP
Re: Polo GTI 9N3 250BHp whats needed?
How much are you looking to spend?
- MODDED9N
- Gold Member
- Posts: 895
- Joined: Sun Feb 28, 2010 9:48 am
- Location: Newbury, Berkshire Phone Number- 07949 330413
Re: Polo GTI 9N3 250BHp whats needed?
I meant to say that I have seen on this website because no one on here seems to have spent as much money on performance as he has! Im not really in the GTI seen as I am a 1.9tdi kinda guy!
Re: Polo GTI 9N3 250BHp whats needed?
dunno bout 250bhp but I'm running a 240 stage 2 k03 for 250 ud need the bigger turbo. Y this randum figure? lol
Re: Polo GTI 9N3 250BHp whats needed?
Well you need to search moreMODDED9N wrote:I meant to say that I have seen on this website because no one on here seems to have spent as much money on performance as he has! Im not really in the GTI seen as I am a 1.9tdi kinda guy!

But saying, this was probably finished before you joined the Polo scene. Seeing his build thread innovated me to buy the GTI
-
kc
- Gold Member
- Posts: 914
- Joined: Wed Oct 01, 2003 2:03 am
- Drives: an imaginary one... for now
- Location: Up North
Re: Polo GTI 9N3 250BHp whats needed?
its not all about the pub talk (bhp)
its all about the torque!
"BHP sells cars, Torque wins races"
haha
its all about the torque!
"BHP sells cars, Torque wins races"
haha
Re: Polo GTI 9N3 250BHp whats needed?
thanks for the replys 250 bhp was a approx 240 sounds good what would i need parts wise?
i've read in some places going over 300 bhp causes problems
@ drennan - i'm looking to spend about £2000 on parts
does anyone know a company or a place i can contact to discuss it like a trusted garage that are specialists in engine performance as well as being safe i don't want a cowboy mechanic when i comes to car modifying i want a professional and safe job i'm will to pay for safety
i've read in some places going over 300 bhp causes problems
@ drennan - i'm looking to spend about £2000 on parts
does anyone know a company or a place i can contact to discuss it like a trusted garage that are specialists in engine performance as well as being safe i don't want a cowboy mechanic when i comes to car modifying i want a professional and safe job i'm will to pay for safety
Polo GTI 9N3 250BHp whats needed?
- Miltek full system £800 (could probably get and alternative for £500)
-Forge FMIC £600 ( alternative £350)
- 4 bar FPR £70 ( second hand £30)
- Remap £350 ( custom map prob £300 and better if you go to the correct guy)
- Forge 007p Dv £100 (i think)
That's the main components and that wouldn't see you far off 240bhp there are other items listed below that would help but only but a few bhp.
-Panel filter or open cone £60
-Badger insulting gasket £70 ( better than newsouth one as it's thicker)
-PD160 intake £60
Prices are just there about. Feel free to add anything I've missed folks.
-Forge FMIC £600 ( alternative £350)
- 4 bar FPR £70 ( second hand £30)
- Remap £350 ( custom map prob £300 and better if you go to the correct guy)
- Forge 007p Dv £100 (i think)
That's the main components and that wouldn't see you far off 240bhp there are other items listed below that would help but only but a few bhp.
-Panel filter or open cone £60
-Badger insulting gasket £70 ( better than newsouth one as it's thicker)
-PD160 intake £60
Prices are just there about. Feel free to add anything I've missed folks.
Re: Polo GTI 9N3 250BHp whats needed?
almost ther josh! TIP is also a requirement me thinks for a stage 2
....if not i got 1 anyway lol £130 sure brings back the memories of whats been spend all adds up eh! 
Polo GTI 9N3 250BHp whats needed?
New I had forgotten something!drennan wrote:almost ther josh! TIP is also a requirement me thinks for a stage 2....if not i got 1 anyway lol £130 sure brings back the memories of whats been spend all adds up eh!
Re: Polo GTI 9N3 250BHp whats needed?
Just corrected you thereJoshGTI wrote: -PD160 intake £75
- lukey GTI
- Silver Member
- Posts: 371
- Joined: Mon May 16, 2011 10:38 am
- Location: huddersfield
- Contact:
Re: Polo GTI 9N3 250BHp whats needed?
dont forget to upgrade your brakes and handling
Re: Polo GTI 9N3 250BHp whats needed?
Thank alot Josh GTI you been a great help i'm collecting my GTI on thursday will post pictures then i'm getting a dump vale fitted for £125 on Saturday
this one
FORGE SPLITTER SPLIT-R DUMP VALVE BOV VW GOLF GTI 1.8
http://www.ebay.co.uk/itm/FORGE-SPLITTE ... 4aac447556
this one
FORGE SPLITTER SPLIT-R DUMP VALVE BOV VW GOLF GTI 1.8
http://www.ebay.co.uk/itm/FORGE-SPLITTE ... 4aac447556

