Forge 007p question

Gtimatt · Post by **Gtimatt** » Sun Jan 08, 2012 11:21 pm

stuck mine on my car a while back, since then I've done a few mods (not sure what bhp/boost pressure I'm running)
revo stage one remap
milltek catback
forge tip
stage one ecs clutch upgrade

should i have upgraded the spring inside the diverter valve?

thanks

lukey GTI · Post by **lukey GTI** » Mon Jan 09, 2012 7:33 am

Yeah you should have a yellow one I think . They do one for mapped car and one for non mapped cars

Gtimatt · Post by **Gtimatt** » Mon Jan 09, 2012 5:08 pm

http://www.forgemotorsport.co.uk/conten ... ct=FMDVTUN

I reckon this is the one

drennan · Post by **drennan** » Mon Jan 09, 2012 7:33 pm

What colour do you think i should have for a stage 2 revo 240bhp?

lukey GTI · Post by **lukey GTI** » Mon Jan 09, 2012 11:06 pm

I don't know. Give. Your tuning company a call. I have yellow on mine. Mines stage 1

benmkiv · Post by **benmkiv** » Mon Jan 09, 2012 11:42 pm

I think you'd need a green for a stage 2 depends on how much boost pressure you're running. Phone revo or awesome

benmkiv · Post by **benmkiv** » Mon Jan 09, 2012 11:43 pm

Meant Blue. The yellow one is good for around 15-22 psi 23 at a push.

dood9n3 · Post by **dood9n3** » Tue Jan 10, 2012 12:01 pm

Valve Spring color coding
Green - 5-15 PSI
Yellow - 15-23 PSI
Blue - 23-30 PSI
Red - 30 + PSI

9N3 Turbo · Post by **9N3 Turbo** » Tue Jan 10, 2012 1:29 pm

dood9n3 wrote:Valve Spring color coding
Green - 5-15 PSI
Yellow - 15-23 PSI
Blue - 23-30 PSI
Red - 30 + PSI

Does anyone know if these are peak figures ?

Mine peaks around 21 psi then settles down to around 10psi near the rev limiter

benmkiv · Post by **benmkiv** » Tue Jan 10, 2012 3:09 pm

These will be the peak at blow off.

9N3 Turbo · Post by **9N3 Turbo** » Tue Jan 10, 2012 5:36 pm

benmkiv wrote:These will be the peak at blow off.

Thanks

dood9n3 · Post by **dood9n3** » Tue Jan 10, 2012 6:20 pm

9N3 Turbo wrote:
dood9n3 wrote:Valve Spring color coding
Green - 5-15 PSI
Yellow - 15-23 PSI
Blue - 23-30 PSI
Red - 30 + PSI
Does anyone know if these are peak figures ?

Mine peaks around 21 psi then settles down to around 10psi near the rev limiter

You need yellow

drennan · Post by **drennan** » Tue Jan 10, 2012 6:24 pm

I will be the same en running the same software surly? Stage 2 revo 9n3 turbo yeah?

9N3 Turbo · Post by **9N3 Turbo** » Tue Jan 10, 2012 7:11 pm

drennan wrote:I will be the same en running the same software surly? Stage 2 revo 9n3 turbo yeah?

Yes i am but have a green spring

9N3 Turbo · Post by **9N3 Turbo** » Tue Jan 10, 2012 7:21 pm

Just ordered the spring tuning kit from forge.

UK-POLOS.NET - THE VW Polo Forum