Has anybody run anything similar to this on the rear of a 9n?
After a quick mock up i think there will be too much poke
Maybe a roll & flare might help haha
Its a 1.9TDi
Feel free to post some wheel porn
Cheers guys
7x16 et23 with 15mm adapters?!
Re: 7x16 et23 with 15mm adapters?!
What are you running at the minute?
This will come in handy and tell you the difference
http://www.1010tires.com/WheelOffsetCalculator.asp
This will come in handy and tell you the difference
http://www.1010tires.com/WheelOffsetCalculator.asp
Re: 7x16 et23 with 15mm adapters?!
Im still running standard sport 15x6 et43 at the moment, so its going to poke a lot more lol 48mm extra.chewy_ wrote:What are you running at the minute?
This will come in handy and tell you the difference
http://www.1010tires.com/WheelOffsetCalculator.asp
Its the adpters making them a et8 thats the issue.
The 6J fronts will be tight too i think. May have to have a rethink!
Nick
- pip_polo
- Bling Bling Diamond Member
- Posts: 2454
- Joined: Thu Jan 04, 2007 3:20 pm
- Location: c**t Drives: Fabia vRS PD200+ ;)
- Contact:
Re: 7x16 et23 with 15mm adapters?!
What wheels are they?
Re: 7x16 et23 with 15mm adapters?!
Porsche fuchpip_polo wrote:What wheels are they?
Im building a 71 beetle and they were bought initially for the bug but they will be too tight on the brakes. So its either sell them or squeeze them on the polo.
Re: 7x16 et23 with 15mm adapters?!
If you run a bit if stretch you'll probably be lfine, used to run 7x15 et13 on my lupo and was fine once arches were rolled, that was with 165/50r15 tho, ideally woulda prefered slightly wider tyres but woulda needed a little bit of.camber maybe
Re: 7x16 et23 with 15mm adapters?!
I am however running compomotive th Monos, 16x8 et25 with 195/45 r16 tyres
Whorage
This is my wheels vs your Fuchs both with same tyres
Hth
Whorage
This is my wheels vs your Fuchs both with same tyres
Hth
Re: 7x16 et23 with 15mm adapters?!
Cheers guys
BICKERTON - Cheers mate, only 4mm extra poke than yours then, are you running camber shims? What size are you running on the front? Im unsure what the offset of a 16x6 fuch is, but looking at it, thats prob going to be more of a problem than the rear.
If they will work, deff a future plan
Ive just had 4 new tyres so will wear them first i guess.
BICKERTON - Cheers mate, only 4mm extra poke than yours then, are you running camber shims? What size are you running on the front? Im unsure what the offset of a 16x6 fuch is, but looking at it, thats prob going to be more of a problem than the rear.
If they will work, deff a future plan
Ive just had 4 new tyres so will wear them first i guess.
Re: 7x16 et23 with 15mm adapters?!
Nope, no camber shims and the arches are untouched other than bending back the brackets on the front arch liners