clutch and selector shaft seal

[rishisisodia]

Hi all I have a polo 6n2 1.4 16v (75bhp) x reg. the selector shaft seal needs replacing aswel as the clutch I was going to have a go at doing it but was hoping to get a bit of advice about it first.

Any tips on doing the clutch?

also whats the best way to do the selector shaft seal?

thanks in advance guys

[alexperkins]

Your best to do the selector shaft seal with the gearbox off

It needs to be hooked out then driven in with a 17mm deep socket

As for the clutch, the Haynes manual is very helpful for this.

[rishisisodia]

that's a great help thanks for that. Also could anyone email me pics of the Haynes manual instructions as I don't have a Haynes manual. email is: [email protected]

[rishisisodia]

anyone?

[alexperkins]

http://www.ebay.co.uk/itm/VW-POLO-Hayne ... 4d0fd3c9dc

Just buy one - thats cheap.

[rishisisodia]

wanted to try and get started this evening and tomorrow, no Haynes will get to me in time that's why im asking for pics

[alexperkins]

Halfords stock them on the shelves...

Besides, its not just a set of pics. Its about 3 full chapters to cover driveshafts, gearbox, clutch, engine mounts etc.