Run Flat Light

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
polo steph
New
Posts: 12
Joined: Thu Oct 16, 2008 6:35 pm

Run Flat Light

Post by polo steph »

Hey everyone, I have owned my 9n3 GTI for about a month or so, the run flat light came on a few weeks ago and I checked my pressure and one was a little low so topped it up, found the button on the dash but it doesn't turn the light off, should it work like that? I got my friend to turn it off with his vagcom in the end but last night it came on again and the tyres are all fine pressure wise, pressed the button and it still doesnt turn off, do I have to get it done with vagcom everytime? I havent got a user manual for the car yet. Any help apreciated x
User avatar
GTi_Red
Silver Member
Posts: 346
Joined: Sun Nov 25, 2012 8:48 pm

Re: Run Flat Light

Post by GTi_Red »

Just hold the botton in until it beeps but if its coming in when tyre pressure is correct check the hand brake lever on the rear calipers isn't sticking
polo steph
New
Posts: 12
Joined: Thu Oct 16, 2008 6:35 pm

Re: Run Flat Light

Post by polo steph »

Thanks I will try holding it in longer, not heard it beep when I have pressed it before. Thank you for your help!
User avatar
Dom_
Silver Member
Posts: 320
Joined: Sat Jul 17, 2010 3:20 pm
Location: Leeds

Re: Run Flat Light

Post by Dom_ »

Yep hold it down for a few seconds on with ignition on or engine running and will give you a nice 'ding' :D
polo steph
New
Posts: 12
Joined: Thu Oct 16, 2008 6:35 pm

Re: Run Flat Light

Post by polo steph »

It worked, your a star :) happy dubber!
Post Reply