Newbie, maunual clutch cable conversion-Arosa

[alexperkins]

Not that tight, Its a metal frame encased in rubber so its tough enough if that makes sense

[piglet14]

All done, many thanks Alex.

If anyone wants to know what a 1.0 clutch should feel like.
With new clutch(Sachs), new cable(ECP), silicon greased pedal bolt & copper greased release arm I can put the pedal to the floor with 2 fingertips, it's odd to drive as the clutch is lighter than the throttle!

'Special' tools:
M8 Spline - long (inner CV)
M6 Spline - any length (release sleeve)
30mm 12 point socket (drive shaft nut)
9mm 12 point socket (clutch cover)

Useful tool:
LONG 18mm combi/ring spanner and/or 18mm extra deep socket, either will work.

[alexperkins]

You are very welcome.

Sounds like a good job jobbed

Well done mate.