Reverse Mirror Tilt 6C GTI

[Monty246810]

Hello everyone can anyone help I want to code the Reverse Mirror Tilt on my 2015 Polo GTI 2015 model. Is there some one that can give me the process on how to do this thanks to who ever can help. My car has Mirror Fold fitted as this seems to be a question that I have been asked so that this can be done.

[iichel]

can't be done, sorry

[Adam87]

can't be done, sorry

What is it preventing this? I know the door mirror will need a different type of motor with extra wires, but is it the door module that doesn't support it?


Sent from my iPhone using Tapatalk

[iichel]

it simply doesn't have the software to do this

[ciclo]

can't be done, sorry

What is it preventing this? I know the door mirror will need a different type of motor with extra wires, but is it the door module that doesn't support it?
Sent from my iPhone using Tapatalk

Take a look to Elsawin, VW FOX 2013 (D) ---> J351

[Adam87]

Good find [emoji106] do you know what modules the fox uses? Are they TSG like polo Transporter?


Sent from my iPhone using Tapatalk

[ciclo]

Good find [emoji106] do you know what modules the fox uses? Are they TSG like polo Transporter?


Sent from my iPhone using Tapatalk

NO.

Crossfox 2017 (without serial numbers or VCID)

Address 09: Cent. Elect. (J519) Labels: 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 089 HW: 7E0 937 089
Component: BCM PQ25 MMI4 H80 0733
Revision: BB080001 Serial number:
Coding: 3A8CCBB84C3BC600103A06C07E88BA80B000629C60842000240580020000
Shop #:
VCID:

Subsystem 1 - Part No SW: 5Z0 959 800 B HW: 5Z0 959 800 B
Component: ZFH_Cross H08 0015
Serial number:
Coding: 006B54

Subsystem 2 - Part No SW: 5Z0 959 800 B HW: 5Z0 959 800 B
Component: ZFH_Cross H08 0015
Serial number:
Coding: 006B54

Subsystem 3 - Part No: 5Z0 947 105 F
Component: DWA-Sensor 00 003 0008
Coding: 000000

Subsystem 4 - Part No SW: 18D 959 442 HW: 18D 959 442
Component: E221__MFL-YLG H01 0110
Serial number:
Coding: 200000

Subsystem 5 - Part No SW: 5Z0 959 800 B HW: 5Z0 959 800 B
Component: ZFH_Cross H08 0015
Serial number:
Coding: 006B54

Subsystem 6 - Part No SW: 5Z0 959 800 B HW: 5Z0 959 800 B
Component: ZFH_Cross H08 0015
Serial number:
Coding: 006B54

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: None
Part No: 5Z0 959 800 B
Component: Z F H GOL/FOX H08 0015
Coding: 0000001
Shop #: WSC 00000 000 00000
VCID:

No fault code found.

[Adam87]

Maybe the mirrors are controlled by the convenience module? I wonder if it can be fitted but only used for certain functions? I.e. Convenience menu, mirror dip


Sent from my iPhone using Tapatalk

[ciclo]

I think they are not the same units for convenience menu and lowering mirror. The lowering mirror unit is from a 2013 model.
Both units would have to cross the Atlantic to do the tests and check if they fit ... via coding of the required functions/features.

I do not have the diagrams from 2017 model (despite I visited Erwin recently due to other matters)

[Adam87]

I checked and it seems there is a dedicated control module for the lowering (J1110) all mirror switch wiring goes through it, pq35 platform cars have it working via the door module, what can't it be that easy [emoji85][emoji23]


Sent from my iPhone using Tapatalk

[C_Randell_23]

Do what I do, save loads of hassle and just manually lower the mirror every time it comes to parallel parking, takes an extra 10 seconds to tilt it but that s better than £80 for a wheel refurb.

[Adam87]

Ball ache that tho [emoji23]


Sent from my iPhone using Tapatalk

[benzinkopf]

This is not working with 7E0?


Sent from my iPhone using Tapatalk

[Adam87]

Additionally if the BCM could control it, you need passenger mirror with additional potentiometers in to carry out the mirror dip


Sent from my iPhone using Tapatalk