Changing from RCD310 to 510

Chat about your 6R/6C model Polos here!
Post Reply
hazzer111
New
Posts: 6
Joined: Fri Oct 27, 2017 11:24 am
Drives: 6R 1.6tdi
Location: UK

Changing from RCD310 to 510

Post by hazzer111 »

Hi, I just bought a 2011 polo, it has the rcd310 fm/am radio. I would like to change it to a RCD510 and want to add bluetooth to it. Is there a way to get the dab radio to work with the current antenna? Also I have rear parking sensors that show up on the radio screen, would this work with the 510 out the box? Any information on adding a bluetooth module would be helpful, I am unsure which one I need and if it work just by plugging it in? Thanks.
Willni
Silver Member
Posts: 419
Joined: Fri Oct 09, 2015 4:46 pm
Drives: Polo '14 6R, Golf 07' Edition 30
Location: NI

Re: Changing from RCD310 to 510

Post by Willni »

For dab you’ll need to change the aerial on the roof the non-dab and dab look the exact same. The parking sensors will show up on the rcd510.

To add bluetooth you need a separate module and loom, then the microphone kit around £200 all in for it IIRC.

The RNS315 offers integrated bluetooth so all you need to do is get a microphone kit which is £30. I opted for the Rns315 I prefer it over the rcd510 and think it looks far better and oem in the car


Sent from my iPhone using Tapatalk
hazzer111
New
Posts: 6
Joined: Fri Oct 27, 2017 11:24 am
Drives: 6R 1.6tdi
Location: UK

Re: Changing from RCD310 to 510

Post by hazzer111 »

Willni wrote: Fri Oct 27, 2017 11:37 am For dab you’ll need to change the aerial on the roof the non-dab and dab look the exact same. The parking sensors will show up on the rcd510.

To add bluetooth you need a separate module and loom, then the microphone kit around £200 all in for it IIRC.

The RNS315 offers integrated bluetooth so all you need to do is get a microphone kit which is £30. I opted for the Rns315 I prefer it over the rcd510 and think it looks far better and oem in the car


Sent from my iPhone using Tapatalk
Thanks, yeah it looks like Rns315 might be my best option. I assume ill have to modify the aerial for dab still. I'm struggling to find an adaptor or stock looking aerial to replace?
thanks
Willni
Silver Member
Posts: 419
Joined: Fri Oct 09, 2015 4:46 pm
Drives: Polo '14 6R, Golf 07' Edition 30
Location: NI

Re: Changing from RCD310 to 510

Post by Willni »

hazzer111 wrote: Fri Oct 27, 2017 4:03 pm
Willni wrote: Fri Oct 27, 2017 11:37 am For dab you’ll need to change the aerial on the roof the non-dab and dab look the exact same. The parking sensors will show up on the rcd510.

To add bluetooth you need a separate module and loom, then the microphone kit around £200 all in for it IIRC.

The RNS315 offers integrated bluetooth so all you need to do is get a microphone kit which is £30. I opted for the Rns315 I prefer it over the rcd510 and think it looks far better and oem in the car


Sent from my iPhone using Tapatalk
Thanks, yeah it looks like Rns315 might be my best option. I assume ill have to modify the aerial for dab still. I'm struggling to find an adaptor or stock looking aerial to replace?
thanks
For the aerial you take the headlining down a touch and the back, and undo the nut holding in the aerial, and then swap the bases, I think you might need to run a new dab line to the radio as well can't remember.
joe6
Bronze Member
Posts: 246
Joined: Mon Aug 22, 2016 5:24 pm
Drives: Golf Mk6 GTI (Scirocco gone) Polo 6c GTI
Location: East Midlands

Re: Changing from RCD310 to 510

Post by joe6 »

Yes you will need a new dab cable as the RNS315 has a separate dab connector.
hazzer111
New
Posts: 6
Joined: Fri Oct 27, 2017 11:24 am
Drives: 6R 1.6tdi
Location: UK

Re: Changing from RCD310 to 510

Post by hazzer111 »

Hi, so I purchased a fm/am rcd510. However when I plug it in all works fine apart from the mdi aux/usb is not picked up by the 510, is there anything I can Do?
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Changing from RCD310 to 510

Post by alexperkins »

Make sure the plug is in properly. They can pop out of the quad lock and stop the MDI working. If that doesn’t fix it, you might have a faulty unit
hazzer111
New
Posts: 6
Joined: Fri Oct 27, 2017 11:24 am
Drives: 6R 1.6tdi
Location: UK

Re: Changing from RCD310 to 510

Post by hazzer111 »

So i tried again, it feels like the connection on the wiring harness isn't as tight as the original. However everything matches. I understand there are additional wires for usb and aux but I assumed the mdi would still work.

https://imgur.com/a/AmXsC
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Changing from RCD310 to 510

Post by alexperkins »

The 510 has full support for MDI
hazzer111
New
Posts: 6
Joined: Fri Oct 27, 2017 11:24 am
Drives: 6R 1.6tdi
Location: UK

Re: Changing from RCD310 to 510

Post by hazzer111 »

alexperkins wrote: Sat Nov 25, 2017 4:13 pm The 510 has full support for MDI
Hmm okay, so it should just work as soon as I plug it in without recoding or anything? As you can see from the pictures I took I have no option for the mdi. It says aux and usb but I assume that's through the other connections.
Thanks for the help
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Changing from RCD310 to 510

Post by alexperkins »

Correct

The 510 will show media in for the MDI

Have you got an aux and a USB socket?
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Changing from RCD310 to 510

Post by alexperkins »

That looks like a Chinese RCD510. Where did you get it from?
hazzer111
New
Posts: 6
Joined: Fri Oct 27, 2017 11:24 am
Drives: 6R 1.6tdi
Location: UK

Re: Changing from RCD310 to 510

Post by hazzer111 »

alexperkins wrote: Sat Nov 25, 2017 4:28 pm Correct

The 510 will show media in for the MDI

Have you got an aux and a USB socket?
I have the aux port in the centre next to the 12v outlet and have the mdi output in the glovebox
alexperkins wrote: Sat Nov 25, 2017 4:30 pm That looks like a Chinese RCD510. Where did you get it from?
Unfortunately you are correct, I purchased it from ebay. I may have to try get a refund from it.
Post Reply