mrk 4 side repeaters

jules_cm · Post by **jules_cm** » Mon Sep 13, 2004 11:15 am

I've just bought some clear side repeaters for my 96 polo and can't see anyway of getting to the side repeaters to actually remove them. How can i remove them to fit my new ones?

bstardchild · Post by **bstardchild** » Mon Sep 13, 2004 11:38 am

jules_cm wrote:I've just bought some clear side repeaters for my 96 polo and can't see anyway of getting to the side repeaters to actually remove them. How can i remove them to fit my new ones?

Can't remember if it's slide em forward and they pop out at one end or slide em back and they pop out - basically it's easy look at your new ones and you'll see one end is a fixed lug and the other end is sprung plastic - you have to compress the sprung plastic end to enable the lug end to pop out

HTH

carmadaaron · Post by **carmadaaron** » Mon Sep 13, 2004 1:25 pm

i think its push towards the back end of the car. its only a 5 min job. wiggle bout with the old 1 to get away from the front wing and then pull (quite tight) the connector.

then its just the reverse to get them on.

jules_cm · Post by **jules_cm** » Mon Sep 13, 2004 4:08 pm

thanks peops will try it out as soon as i get it back from the garage!

david burton · Post by **david burton** » Mon Sep 13, 2004 4:13 pm

depends which way they were put in in the first place

bstardchild · Post by **bstardchild** » Mon Sep 13, 2004 4:48 pm

david burton wrote:depends which way they were put in in the first place

Thats why I was hesitant in pointing out the direction to push or pull - I'm sure one side of mine it was push to the rear the other side it was push to the front....

david burton · Post by **david burton** » Mon Sep 13, 2004 6:13 pm

it's always going to be the other, no matter what you say

sod's law

Criz · Post by **Criz** » Mon Sep 13, 2004 9:00 pm

I use a screwdriver and a cloth to stop me from damaging the paint.

UK-POLOS.NET - THE VW Polo Forum

mrk 4 side repeaters

mrk 4 side repeaters

Re: mrk 4 side repeaters