Hello everyone,
Hope everyone is safe and good.
I am from India and owning Polo 6R Trendline which doesn't have buttons on steering wheel. So I am not able to see the average fuel consumption on cluster. Is it possible to make default when I switch on ignition by VCDS.
Right now its displaying only outside temperature:(
Need help!
VCDS tweak for Average Fuel consumption display as default
-
IndianTravelBlog
- New
- Posts: 3
- Joined: Tue Aug 04, 2020 12:47 pm
- Drives: Polo 6R or 6C Indian Version
- Location: India
-
iichel
- Bling Bling Diamond Member
- Posts: 6686
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: VCDS tweak for Average Fuel consumption display as default
No but you could connect a wire to the cluster and push the wire to GND a few times to emulate the mfd buttons. You do need vcds to enable the mfd buttons
-
IndianTravelBlog
- New
- Posts: 3
- Joined: Tue Aug 04, 2020 12:47 pm
- Drives: Polo 6R or 6C Indian Version
- Location: India
Re: VCDS tweak for Average Fuel consumption display as default
Hey iichel,
Do you know the Pinout of Cluster for this DIY?
I am having 6RF920861F Cluster in my Polo.
Do you know the Pinout of Cluster for this DIY?
I am having 6RF920861F Cluster in my Polo.
-
iichel
- Bling Bling Diamond Member
- Posts: 6686
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/