Hi,
I've recently bought a 6r 1.6tdi and I'm looking to get the car mapped. I would be looking at around 150bhp (or stage 2 from most companies) and I have been recommended by one company to look into an intercooler upgrade, although just as a recommendation. I was wondering if anyone had mapped theirs to this spec, wether they have used an intercooler or not and of so what? I've been looking at dark side intercoolers but for the price I might just keep it standard and go with a slightly lower tune around 130/135.
6r 1.6 TDI remap
-
amer6R
- Platinum Member
- Posts: 1301
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: 6r 1.6 TDI remap
For 150 hp, you should remove the DPF, if you dont and you still push 150 with stock turbo it will smoke and clog the DPF and you could damage your turbo.
Re: 6r 1.6 TDI remap
Yeah I was going to remove the dpf but just wondering
more about the intercoolers and if they were needed. Thanks though
more about the intercoolers and if they were needed. Thanks though
-
amer6R
- Platinum Member
- Posts: 1301
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: 6r 1.6 TDI remap
Its possible to get 140/150 from stock setup. Ask @iichel he's doing a 1.6 tdi project
- til3tsio
- Getting There!
- Posts: 89
- Joined: Thu Feb 11, 2021 10:53 pm
- Drives: Seat Toledo KG
- Location: Greece
Re: 6r 1.6 TDI remap
Done my toledo 4 monts ago with Revo. CAYC engine got to 130hp.
I'm happy with the diference from stock.
I'm happy with the diference from stock.