Schrader valve for AirCon

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
ccarmock
New
Posts: 43
Joined: Sat Apr 07, 2007 10:18 pm

Schrader valve for AirCon

Post by ccarmock »

Hi
I wonder if anyone can advise me of the correct part number for a replacement schrader valve for a 2007 VW Polo 9N3 please? This is for the low pressure side.
I have seen reference to a part 8E 08 20855 then a reference to this being the right part for the 2014 onwards model.
Any help appreciated
RUM4MO
Bling Bling Diamond Member
Posts: 6069
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: Schrader valve for AirCon

Post by RUM4MO »

I've had a look at the parts listing, but it looks like you need to buy the complete valve housing with insert - and obviously a new O-ring seal, but I'm guessing that you are only needing to buy a new Schrader insert.

So maybe make contact with a local AC proper fixer, I seem to remember looking into this many years ago - for a 2000 VW Passat 4Motion and finding it was different thread sizes for the Lo and Hi side port inserts.
ccarmock
New
Posts: 43
Joined: Sat Apr 07, 2007 10:18 pm

Re: Schrader valve for AirCon

Post by ccarmock »

Yes I just need the valve insert. Certainly the housing is a different side on high and low side so assume the high side valve is different also.
Post Reply