Hey all, ive got a small problem - i have aquired over the past few months a rear and two front bumpers... minus all end caps, mouldings, but more importantly, brackets!
The VW part no's for these are 861 807 135(L) and -136 (R) for the fronts, and 861 807 331 (L) and -332 (R)
I know its a long shot, but does anyone have any of these or know where i can get them? Failing that, im gonna have to make my own up - which wont be that tricky, but could be made easier if i had just one to copy from
Any help is much appreciated
Cheers
Steve
Mounting Chrome Bumpers
-
Jabemeister
- New
- Posts: 25
- Joined: Sat Oct 25, 2003 8:49 pm
- Location: In The Middle
Have a word with MK1magic off Porka(Arron), he's getting some moulded in fibreglass for his project mk1!
Might even be getting pattern bumpers too!
Hmmm can see a market for these out there...lucky mine aren't too bad!
Fellas, nows the time to check Your Vdub shows for Polo oddments....i got a pair of mk1 nos chrome bumpers for £80 last year from Stamford Hall....(sold the front one on for £45 cause i only needed the rear!)...Polo parts will stick out a mile and blind you amongst the beetle stuff!!!
Hope that helps Steve!
John
Might even be getting pattern bumpers too!
Hmmm can see a market for these out there...lucky mine aren't too bad!
Fellas, nows the time to check Your Vdub shows for Polo oddments....i got a pair of mk1 nos chrome bumpers for £80 last year from Stamford Hall....(sold the front one on for £45 cause i only needed the rear!)...Polo parts will stick out a mile and blind you amongst the beetle stuff!!!
Hope that helps Steve!
John
Re: Mounting Chrome Bumpers
They are also hard to find in Germany. You can get a complete set in new condition for approx. 80 EUR + freight.
Mike
Mike
SteB wrote:Hey all, ive got a small problem - i have aquired over the past few months a rear and two front bumpers... minus all end caps, mouldings, but more importantly, brackets!
The VW part no's for these are 861 807 135(L) and -136 (R) for the fronts, and 861 807 331 (L) and -332 (R)
I know its a long shot, but does anyone have any of these or know where i can get them? Failing that, im gonna have to make my own up - which wont be that tricky, but could be made easier if i had just one to copy from
Any help is much appreciated
Cheers
Steve
Some prives are pervert. The back plastik edges 379 A and 380 A will cost nearly 80 up to 100 EUR / both. This edges have been stopped in production since 10 years.
Mike
Mike
SteB wrote:spotted these, i know its not a bad price but it seems a lot at this moment in time!
that guy gets some good stuff through from time to time - definately worth watching