Rear Anti Roll Bar (Now with Pics)
- ticki
- Sponsor
- Posts: 720
- Joined: Thu Sep 28, 2006 12:34 pm
- Location: Newcastle upon Tyne Drives: 6N2 GTi
Good News.
I finally got a look at my mates Mk3 Seat Ibiza Cupra. The rear axle looks indentical to the Polo. I used a tape measure and all measurements where roughly the same. I took the axle length to be at 1400mm approx.
Fingers crossed, I'm going to order the whiteline ARB, sometime soon. Wish me luck
I finally got a look at my mates Mk3 Seat Ibiza Cupra. The rear axle looks indentical to the Polo. I used a tape measure and all measurements where roughly the same. I took the axle length to be at 1400mm approx.
Fingers crossed, I'm going to order the whiteline ARB, sometime soon. Wish me luck
-
Dangerous Dave
- Silver Member
- Posts: 297
- Joined: Fri May 27, 2005 10:52 am
- ticki
- Sponsor
- Posts: 720
- Joined: Thu Sep 28, 2006 12:34 pm
- Location: Newcastle upon Tyne Drives: 6N2 GTi
IT FITS IT FITS IT FITS
Like a glove
Fitting it this morning. I was bit sceptical at first, it took about 2 hours to complete. But I probably could fit it in 30 mins now
Handling. First corner felt very wierd, I was not too confident about the ugrade, but after 5 miles of driving it started to settle in and improve, and it has not stopped yet. Little or no body roll from the rear. tbh I am now considering a thicker front ARB. But im gonna wait a while untill it fully settles in.

PS dont worry i be will posting some pic's up later, possibly a how to guide.
Like a glove
Fitting it this morning. I was bit sceptical at first, it took about 2 hours to complete. But I probably could fit it in 30 mins now
Handling. First corner felt very wierd, I was not too confident about the ugrade, but after 5 miles of driving it started to settle in and improve, and it has not stopped yet. Little or no body roll from the rear. tbh I am now considering a thicker front ARB. But im gonna wait a while untill it fully settles in.
PS dont worry i be will posting some pic's up later, possibly a how to guide.
- ticki
- Sponsor
- Posts: 720
- Joined: Thu Sep 28, 2006 12:34 pm
- Location: Newcastle upon Tyne Drives: 6N2 GTi
Some Pics
Tools you will need

Assemble ARB, but don't tighten yet


Soar off excess







Tighten bolts under load/Normal ride height.

Tools you will need

Assemble ARB, but don't tighten yet


Soar off excess







Tighten bolts under load/Normal ride height.

Last edited by ticki on Thu Apr 19, 2007 9:07 am, edited 1 time in total.
- ticki
- Sponsor
- Posts: 720
- Joined: Thu Sep 28, 2006 12:34 pm
- Location: Newcastle upon Tyne Drives: 6N2 GTi
Excellent. This is just what my Polo has been crying out for ages. With the ARB I can really throw the car round corners, without resorting to prayer 
Also rear just feels planted to the road, and stable at speed. Love it.
Also rear just feels planted to the road, and stable at speed. Love it.
Last edited by ticki on Tue May 08, 2007 1:11 pm, edited 1 time in total.
