Hi ciclo,
I finally solved the problem by replacing the lock 5K1 837 015.
When the light stopped working, the tester read 5.88V, but after a few days it was still at 0V. Now everything is fine.
Thank you very much.
I've collected all the materials needed to install the interior lights on the door ...
Search found 83 matches
- Sat Oct 17, 2026 8:54 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Driver's side door voltage issue
- Replies: 7
- Views: 2928
- Wed Oct 07, 2026 6:22 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Driver's side door voltage issue
- Replies: 7
- Views: 2928
Re: Driver's side door voltage issue
The multimeter reads 5.88V with the door open and closed. So, do I think it's defective?
Do you have a code for the original LED lights?
---
Perfect, thanks. As soon as I have all the materials, I'll look for them
Do you have a code for the original LED lights?
---
Perfect, thanks. As soon as I have all the materials, I'll look for them
- Wed Oct 07, 2026 9:17 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Driver's side door voltage issue
- Replies: 7
- Views: 2928
Re: Driver's side door voltage issue
Hi Ciclo,
The problem is the lock mechanism "5K1 837 015"? I need to replace it
Can you recommend a relay for the interior lights I plan to install later?
While we're at it, is there a diagram showing where to get the 58d signal, the positive, and the negative to connect the relay and lights?
The problem is the lock mechanism "5K1 837 015"? I need to replace it
Can you recommend a relay for the interior lights I plan to install later?
While we're at it, is there a diagram showing where to get the 58d signal, the positive, and the negative to connect the relay and lights?
- Tue Oct 06, 2026 6:02 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Driver's side door voltage issue
- Replies: 7
- Views: 2928
Driver's side door voltage issue
Good evening everyone,
I have an issue regarding the voltage at the driver's side door (Polo 6r 2011 1.6 tdi).
I installed an under-door light using the following two connections:
- Green/white wire from the door lock connector
- Red/yellow wire from the window regulator connector
When the door ...
I have an issue regarding the voltage at the driver's side door (Polo 6r 2011 1.6 tdi).
I installed an under-door light using the following two connections:
- Green/white wire from the door lock connector
- Red/yellow wire from the window regulator connector
When the door ...
- Fri Feb 02, 2024 10:28 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Fog lights and trunk light problem
- Replies: 0
- Views: 1121
Fog lights and trunk light problem
Hi guys,
I was wondering if anyone had already had the same problem as me and so I'll try to find a solution.
Years ago I installed the aftermarket light switch with the sensor installed and then the automatic. Except that in order to make the coming and leaving home function work I had to ...
I was wondering if anyone had already had the same problem as me and so I'll try to find a solution.
Years ago I installed the aftermarket light switch with the sensor installed and then the automatic. Except that in order to make the coming and leaving home function work I had to ...
- Tue Dec 01, 2020 7:35 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Light signal on door panels
- Replies: 4
- Views: 838
Re: Light signal on door panels
Grey and blue wire from where?
- Tue Dec 01, 2020 4:11 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Light signal on door panels
- Replies: 4
- Views: 838
Re: Light signal on door panels
Yes, that's okay too. I need to know the number of the cable and the voltage, to buy leds with same voltage.
Thank you
Thank you
- Tue Dec 01, 2020 2:02 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: Light signal on door panels
- Replies: 4
- Views: 838
Light signal on door panels
Hi,
I need to take the light signal from all door panels of my polo 6r. The signal that turn on when i turn on the headlights. Can you help me?
I need to take the light signal from all door panels of my polo 6r. The signal that turn on when i turn on the headlights. Can you help me?
- Wed Nov 07, 2018 5:52 am
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: DOORS LOCKING/UNLOCKING PROBLEM
- Replies: 8
- Views: 5015
Re: DOORS LOCKING/UNLOCKING PROBLEM
Today I will bring the car to a specialist. let's see what he says ..
Inviato dal mio SM-G935F utilizzando Tapatalk
Inviato dal mio SM-G935F utilizzando Tapatalk
- Sun Nov 04, 2018 9:55 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: DOORS LOCKING/UNLOCKING PROBLEM
- Replies: 8
- Views: 5015
Re: DOORS LOCKING/UNLOCKING PROBLEM
I think that I suggested that the locking controller will not now be within the CCM, but either within the BCM which replaced the CCM or it could have its own controller - I have not examined that area of the car's wiring system. What you think that i have to do after removing all added cables ...
- Fri Nov 02, 2018 5:41 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: DOORS LOCKING/UNLOCKING PROBLEM
- Replies: 8
- Views: 5015
Re: DOORS LOCKING/UNLOCKING PROBLEM
do you think that i have to disassemble everything and check all the cables concerning the door closures? where is the comfort control module located?
- Thu Nov 01, 2018 1:45 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: DOORS LOCKING/UNLOCKING PROBLEM
- Replies: 8
- Views: 5015
Re: DOORS LOCKING/UNLOCKING PROBLEM
I disconnected all the added cables. I have mounted original vw door lock.
Is it possible that there is a problem on fuses, cables frayed or main doors locking unit (if exist)?
Inviato dal mio SM-G935F utilizzando Tapatalk
Is it possible that there is a problem on fuses, cables frayed or main doors locking unit (if exist)?
Inviato dal mio SM-G935F utilizzando Tapatalk
- Wed Oct 31, 2018 5:14 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: DOORS LOCKING/UNLOCKING PROBLEM
- Replies: 8
- Views: 5015
DOORS LOCKING/UNLOCKING PROBLEM
Hi everyone,
Here we are with a new problem :(
A few days ago I mounted the lights under the doors connecting them to each door in the corresponding pin of the lock / window connector (the positive in the window glass and the negative at the lock connector.
I add that for some time I had a problem ...
Here we are with a new problem :(
A few days ago I mounted the lights under the doors connecting them to each door in the corresponding pin of the lock / window connector (the positive in the window glass and the negative at the lock connector.
I add that for some time I had a problem ...
- Mon Oct 22, 2018 4:08 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: FBZ Polo's
- Replies: 40
- Views: 8822
Re: FBZ Polo's
I have connected the negative to pin n°3 of locking door connector and positive to n°16 pin of window motor, but the light not work
https://uploads.tapatalk-cdn.com/20181022/4b9d16cb4265e8f18a2463113e32de88.jpg https://uploads.tapatalk-cdn.com/20181022/366a88611c9951ed712b02f8475a799b.jpg ...
https://uploads.tapatalk-cdn.com/20181022/4b9d16cb4265e8f18a2463113e32de88.jpg https://uploads.tapatalk-cdn.com/20181022/366a88611c9951ed712b02f8475a799b.jpg ...
- Sun Oct 21, 2018 9:40 pm
- Forum: MK8 and MK9 (6R/6C) Polo (inc GTI) - Years 2009-2017
- Topic: FBZ Polo's
- Replies: 40
- Views: 8822
Re: FBZ Polo's
No one know if there is the correct pin to connect it?
Inviato dal mio SM-G935F utilizzando Tapatalk
Inviato dal mio SM-G935F utilizzando Tapatalk